➡❗ KESSV2: Continental Simos 15.2, Simos 15.3 and Simos 8.5 now supported via OBD by KESSv2!❗⬅

⭐Thanks to this latest release, you will be able to work on numerous vehicles of the VAG group: and in fact, petrol vehicles from different brands like Audi, Volkswagen, Skoda and Porsche are added to the list. You will be able to read and write Volkswagen Golf, Polo, Fox, Suran, Sagitar, Saveiro, but also Skoda Rapid Spaceback through the OBD port.

⭐But that’s not all: with the Continental Simos 8.5 ECU you will also have the opportunity to read the ECU virtually without disassembling it! With this update you can also work on high-performance 2.8 and 3.0 petrol engines, like Audi S5, Q5, S4, A6, A7, Porsche Cayenne, Volkswagen Touareg!

✅ECUs supported via OBD2 (reading, writing):

- Skoda Rapid Spaceback NH1 1.6 16v MPI Flex 5MT Continental Simos 15.25
- Volkswagen Fox 5Z 1.6 16v MPI Flex 5MT Continental Simos 15.25
- Volkswagen Gol NF 1.6 16v MPI Flex 5MT Continental Simos 15.25
- Volkswagen Golf 5K1 1.4 16v MPI Flex 5MT Continental Simos 15.25
- Volkswagen Golf 5K1 1.6 16v MPI Flex 5MT Continental Simos 15.25
- Volkswagen Polo 6R 1.4 16v MPI Flex 5MT Continental Simos 15.25
- Volkswagen Polo 6R 1.6 16v MPI Flex 5MT Continental Simos 15.25
- Volkswagen Sagitar 1B 1.6 16v MPI Flex 5MT Continental Simos 15.25
- Volkswagen Saveiro 1.6 16v MPI Flex 5MT Continental Simos 15.25
- Volkswagen Suran 1.6 16v MPI Flex 5MT Continental Simos 15.25

✅ECUs supported via OBD2 (virtual reading, writing):

- Audi A4 B8 3.0 TFSI Quattro S-Tronic Continental Simos 8.5
- Audi A5 3.0 TFSI Quattro S-Tronic Continental Simos 8.5
- Audi A5 Cabriolet 3.0 TFSI Quattro S-Tronic Continental Simos 8.5
- Audi A5 Sportback 3.0 TFSI Quattro S-Tronic Continental Simos 8.5
- Audi A6 Allroad C7 3.0 TFSI Quattro S-Tronic Continental Simos 8.5
- Audi A6 C7 2.8 FSI Continental Simos 8.5
- Audi A6 C7 2.8 FSI Multitronic Continental Simos 8.5
- Audi A6 C7 2.8 FSI Quattro S-Tronic Continental Simos 8.5
- Audi A6 C7 3.0 TFSI Quattro S-Tronic Continental Simos 8.5
- Audi A7 C7 2.8 FSI Multitronic Continental Simos 8.5
- Audi A7 C7 2.8 FSI Quattro S-Tronic Continental Simos 8.5
- Audi A7 C7 3.0 TFSI Quattro S-Tronic Continental Simos 8.5
- Audi A8 D4 3.0 TFSI Quattro S-Tronic Continental Simos 8.5
- Audi Q5 3.0 V6 24v TFSI Quattro Continental Simos 8.5
- Audi Q5 3.0 V6 24v TFSI Quattro S-Tronic Continental Simos 8.5
- Audi Q7 3.0 TFSI Quattro S-Tronic Continental Simos 8.5
- Audi S4 Avant B8 3.0 V6 TFSI Quattro 6MT Continental Simos 8.5
- Audi S4 Avant B8 3.0 V6 TFSI Quattro 7AT Continental Simos 8.5
- Audi S4 B8 3.0 V6 TFSI Quattro 6MT Continental Simos 8.5
- Audi S4 B8 3.0 V6 TFSI Quattro 7AT Continental Simos 8.5
- Audi S5 3.0 V6 24v TFSI Quattro Continental Simos 8.5
- Audi SQ5 3.0 V6 24v TFSI Quattro Continental Simos 8.5
- Porsche Cayenne 92A 3.0 V6 Turbo Continental Simos 8.5
- Volkswagen Touareg 7P 3.0 V6 TSI Continental Simos 8.5

➡️❗Flex ver 4.5.0.0 released❗⬅

⭐Bench / Boot for VAG Simos 8.x and Porsche SDIx!

⭐MAGICMOTORSPORT has just released Bench/Boot solutions for Continental Simos 8.x ECUs installed in VAG group vehicles, an extra programming mode other than the existing one in OBD for 3000TFSI engines.

⭐Plus, there are new Bench solutions for the Continental SDIx control units installed in an assortment of Porsche vehicles (Cayenne, Macan & Panamera in the 3000 and 4800 Turbo versions). These protocols guarantee a complete and safe backup of the ECU as there is no need to open or tamper with it.

⭐In release 4.5.0.0, the completion of the migration of the Honda Keihin ECUs for map programming and therefore for vehicle tuning operations of the OBD / Bench protocols from MAGPro2 X17 to FLEX has been completed.

⭐In addition to the Honda Keihin protocol, quite a few petrol engines from 1200cc to 1800VTEC, including the Hybrid versions, produced from 2005 to 2017 have also been added to the FLEX vehicle list.

✅New Protocols added

✅Bugfixes:

- Fixed OBD reading/writing issues on PSA BOSCH MED17.4.2;
- Fixed OBD reading/writing issues on BOSCH EDC16C32;
- Fixed OBD reading/writing issues on DCM3.7 Chevrolet.

✅Software improvements:

- Added: new OBD version for BOSCH MED17.5.21;
- Added: OBD support for new BOSCH version MD1CP004 – VAG;
- Added: BENCH support for the latest version of BOSCH MD1CS006 – MB

➡❗bFlash Update V2004A❗⬅

bFlash now supports:

⭐ All McLarens with 4.0TT & 3.8TT via OBD⭐ this includes every model starting with the McLaren MP4-12C up to the McLaren 720S & Senna.

✅Writing - between 2 minutes (Calibration Flash) & 10 minutes (Full Flash + Patch); reading - Virtual read in a matter of seconds.

✅Post flash adaptations are required. Adaptations routines are integrated in bFlash.

✅The following ECUs are covered:

- Bosch ME17.8.32 TC1797
- Bosch ME17.8.33 TC1793

➡❗K-TAG UPDATE: ECU Marelli MJD6F3, MJD6JF, IAW 10GF and Continental CM2350B are now supported by K-TAG❗⬅

⭐With K-TAG Service Mode (SM), you will be able to speed up the passages greatly, by reading and writing on the bench without opening the ECU, the content of the Marelli MJD6F3, MJD6JF ECUs with MPC563 microcontroller. These ECUs are mounted on Fiat 500, Doblò, Grande Punto, Alfa Romeo Mito, Lancia Ypsilon, Musa and many other vehicles.

⭐By activating K-TAG Freescale with BAM (Bus Access Module) connection, you will be able to simplify the connection between K-TAG and the Marelli ECUS IAW 10GF installed on 1.8 Flex engines (flexible-fuel), very popular in Latin America; this way you will read, write and clone the entire content of the ECU!

⭐The Continental CM2350B ECU with Cummins engine is now supported, equipped on the Dodge Ram. Then it will be possible to read and write the entire content of the ECU by activating the JTAG Freescale, allowing all these operations necessary for repairing, including the cloning itself.

✅New vehicles supported by K-TAG

➡❗Autotuner UPDATE❗⬅

Autotuner now supports:

⭐Mercedes CDI & BlueTEC Delphi CRD3.X - CRD3P.X : TC1793 & TC1797 ⭐ - Bench Read (incl. EEPROM); Bench Write

✅On the following ECUs:

- Delphi CRD3 TC1797
- Delphi CRD3.10 TC1797
- Delphi CRD3.1R TC1797
- Delphi CRD3.2R TC1797
- Delphi CRD3.20 TC1797
- Delphi CRD3.30 TC1797
- Delphi CRD3.40 TC1797
- Delphi CRD3.50 TC1797
- Delphi CRD3.58 TC1797
- Delphi CRD3.59 TC1797
- Delphi CRD3.60 TC1797
- Delphi CRD3.7A TC1797
- Delphi CRD3.E1 TC1793
- Delphi CRD3P.E1 TC1793
- Delphi CRD3P.A0 TC1797
- Delphi CRD3P.B0 TC1793
- Delphi CRD3P.C0 TC1793
- Delphi CRD3P.D1 TC1793
- Delphi CRD3P.G0 TC1793
- Delphi CRD3.F1 TC1793
- Delphi CRD3.N5 TC1797

➡❗FLEX SALE❗⬅

⭐ April 21st - May 4th ❗25% OFF❗ Motorola MPC5xxx and Renesas SM7xxxx FLEX SW packages⭐

Use the promo code ➡flexsale⬅ to get this 25% discount.

BitEdit 1.1

NEW MODULE - Honda Moto Keihin

Editing files from Honda bikes, scooters and ATVs with Keihin ECUs.

New features:
- Added Full Screen Mode (F11) that greatly conserves screen space
- Added support for Flags/Strings editing including BitFlags in new map packs
- HexDump: greatly enhanced toolbar
- HexDump: added clipboard support, copy+paste works with free-form selection
- HexDump: different selection behavior with CTRL and ALT keys
- HexDump: number of columns can be set explicitly
- HexDump: added bar visualization and can be switched (ASCII/BARS)
-HexDump: arbitrary offsets

Improvements:
- Improved DataIndex/IndexData axes support
- Added support for new map formats in Honda Moto module
- Added support for additional DTC code formatting and descriptions
- Added color customization support for 2D view
- Added customization for line thickness and point size in 2D view

Bug fixes:
- Fixed a lot of stability bugs and crashes caused by map pack internal errors
- Fixed memory allocation and leakage issues on big map packs
- Fixed a rare bug with zombie processes remaining after closing BitEdit
- Fixed hot keys for editing getting disabled sometimes

➡❗BitBox/BitEdit Victory Day SALE❗⬅

⭐ May 1st - 10th ❗15% OFF❗ ALL modules⭐

Use the promo code ➡bitsale152020⬅ to get this 15% discount.

➡❗NEW item in our catalogue - HP Tuners MPVI2❗⬅

⭐MPVI2 is the last generation adapter which comes packaged with VCM Editor and VCM Scanner and programming/USB cables, making up the essentials of VCM Suite, bringing you one of the most powerful and inclusive scanning, diagnostic, logging and calibration products on the market.⭐

❗NB: for non-US customers only❗

➡❗MMC Flasher SUPER Update❗⬅

NEW MODULE - ⚡️MODULE 86⚡️ - ❗Isuzu UDS 4JJ3❗

Identification, virtual reading, calibration area writing, errors reading/writing, checksum correction.

❗Tested ONLY on the bench! ECU opening is not required❗

NB! Price lowering is possible in the future.