Chip Tuning Tools

by **ECUTools** » Fri May 15, 2020 11:33 am

➡❗bFlash Update V2005B❗⬅

bFlash now supports:

⭐VAG Siemens ECUs on the bench⭐

✅Writing - around 30 seconds; reading - around 1 minute.

✅ECU cloning is not possible.

✅The following ECUs are covered:

- SIMOS 8.3 TC1796
- SIMOS 8.4 TC1796
- SIMOS 8.5 TC1796
- SIMOS 12.1 TC1797
- SIMOS 12.2 TC1797
- PCR 2.1 TC1796

by **ECUTools** » Fri May 15, 2020 4:07 pm

➡❗bFlash Update V2005C❗⬅

bFlash now supports:

⭐BMW DKG7⭐ on the bench.

✅Writing - around 20 seconds; reading - around 1 minute.

✅TCU cloning is possible.

✅The following TCUs are covered:

- Temic DK436.g2 TC1784

by **ECUTools** » Mon May 18, 2020 10:08 am

➡❗MD Flasher UPDATE❗⬅

⚡️NEW MODULE ❗License 67 - VAG ECU Magneti Marelli 4HV/7GV EEPROM 95320 OBDII❗

✅Via OBD or on the bench;
EEPROM R/W — 95320 EEPROM reading/writing;

✅Built-in IMMO, CS, MAC,LOGIN, VIN editor;
There is no need to open the ECU and solder 95320 EEPROM out in order to wirk wih an external flashing tool. It is a great advantage which allows to preserve the ECU seals.

✅The module allows to clone the IMMO data, edit it and write it back.

✅These ECUs were installed in VW Polo 2009–2018, SCODA Rapid with 1.6L CFNA/CFNB/CLRA Magneti Mareli 7GV, 1.4 BUD/BXW/CGGA/CGGB Magneti Mareli 4HV engines.

❗Attention! The module will be available after May 31st.❗

by **ECUTools** » Mon May 18, 2020 10:42 am

➡❗Flex ver 4.8.0.0 released - Bench for GETRAG Gen2 BMW and OBD for Bosch Honda MEDC17 ECUs❗⬅

⭐MAGICMOTORSPORT has released an exclusive solution for the Bench programming of second generation GETRAG DKG TCUs installed in the BMW M4 and M2 Competition series cars. FLEX SW version 4.8.0.0 is ready and it includes new OBD solutions for the Bosch MED17 and EDC17 ECUs installed in Honda brand cars (among the list of supported vehicles: Honda CIVIC Type-R MK10 2.0L, Honda CR-V).

✅New Protocols added:
- BMW Getrag DKG Gen2: Read/Write/Checksum Maps, Read/Write IntEprom, Clone supported by Full backup option
- Honda BOSCH EDC17CP50 OBD: Virtual Read/Write/Checksum Maps
- Honda BOSCH EDC17C58 OBD: Virtual Read/Write/Checksum Maps
- Honda BOSCH EDC17C72 OBD: Virtual Read/Write/Checksum Maps
- Honda BOSCH MED17.9.3 OBD: Virtual Read/Write/Checksum Maps
- Honda BOSCH EDC16C7 OBD K-line: Virtual Read/Write/Checksum Maps
- Renault EDC16C3 OBD: Read/Write/Checksum Maps/Recovery

✅Bugfixes:
- FORD Continental EMS2102 Fixed writing issue in OBD
- PSA DCM3.4 Fixed identification issues

✅Software improvements:
- Added new Honda Keihin version based on SH72546
- Added new CRC for MB BOSCH MG1CP002
- Added new MB BOSCH EDC17CP57 version to the OBD protocol
- Improved writing for MB DELPHI CRD3.x OBD protocol

by **ECUTools** » Mon May 18, 2020 11:32 am

➡❗ KESSV2: Continental SIMOS 18.10 now available via OBD by KESSv2❗⬅

⭐The 733 KESSv2 protocol is now available!
Alientech is now able to provide a full service by offering to the customers the OBD-II programming through KESSv2 and the virtual reading for the VAG 2.0T EA888 Gen3 models.

✅New VAG vehicles now supported:

- Audi S3 2.0 TFSI
- Cupra Ateca 2.0 TFSI
- Porsche Macan 2.0 T
- Seat Leon 2.0 TFSI
- Volkswagen Arteon 2.0 TSI
- Volkswagen Golf 2.0 TSI

⭐BMW X1 with ECU Bosch MG1CS201, controlled by Infineon TC298 micro is now added to the 702 protocol of KESSv2, for free!

✅ECUs supported via OBD2 (virtual reading, writing):

- Audi S3 2.0 TFSI Quattro Continental Simos 18.10
- Audi S3 2.0 TFSI Quattro S-Tronic Continental Simos 18.10
- Cupra Ateca KH7 2.0 TFSI 7AT 4Drive Continental Simos 18.10
- Porsche Macan 95B 2.0 16v Turbo 7AT Continental Simos 18.10
- Seat Ateca KH7 2.0 TFSI 7AT 4Drive Continental Simos 18.10
- Seat Leon 5F1 2.0 TFSI Cupra 7AT Continental Simos 18.10
- Volkswagen Arteon 3H7 2.0 TSI 7AT Continental Simos 18.10
- Volkswagen Golf 5G1 2.0 TSI GTI 6MT Continental Simos 18.10
- Volkswagen Golf 5G1 2.0 TSI GTI 7AT Continental Simos 18.10

by **ECUTools** » Thu May 21, 2020 2:59 pm

BitBox 3.3.0 rev 1

NEW MODULE - Continental M3C

OBD/Bench working with Continental M3C ECUs used in different moto/extreme vehicles.

Software identification, FullFlash reading and writing via CAN-bus, map area checksum correction.

Arctic Cat Continental M3C 9S12XE (FID:194)
BRP Continental M3C 9S12XE (FID:193)
Ducati Continental M3C 9S12XD (FID:191)
Ducati Continental M3C 9S12XE (FID:192)
KTM/Husqvarna Continental M3C 9S12XE (FID:196)
Kymco/Sherco/Stels/TGB Continental M3C 9S12XE (FID:195)

Attention! The files contain virtual EEPROM with mileage info, VIN, keys, etc. Make sure that you will make a MOD file based on the file you read. The module supports cloning as well
Attention! Bench work with all the listed ECUs is guaranteed. OBD working is also possible if the vehicle has no systems that will interrupt connection — e.g. dashboard and power steering wheel in BRP. You will need to switch off those systems or work on the BENCH

NEW MODULE - Honda Marine Keihin

Reflashing Honda Marine Outboard engines with Keihin ECUs.

Software identification, FullFlash reading and writing via K-line, checksum correction, EEPROM reading and writing, recovery from any states.

Honda Marine Keihin K-Line Reader (FID:229)
Honda Marine Keihin M32R 256KB (FID:228)

Attention! Some of ECUs may require external programming voltage to start writing. If this ECU type is detected automatically, BitBox will ask you to perform some actions — it is possible on the BENCH only. Please check the manual and YouTube videos for details

NEW MODULE - Suzuki Marine

Bench working with Mitsubishi ECUs used in Suzuki Marine Outboards.

Current version supports only Suzuki Marine DF9.9B/15A/20A. Other ECU types/Outboards will be added ASAP.

FID 198: Suzuki Marine Mitsubishi MH8104F K-Line
Software identification, FullFlash reading and writing via K-line, checksum correction.

Attention! This module requires +16V programming voltage to be supplied to the ECU. This voltage can be taken from pin 12 of the J2534 device (preferred) or from an external power supply. The J2534 device must support single byte K-Line operations, +16V programming voltage set up on pin 12. Tactrix OpenPort v2 (preferred) and DrewTech Cardaq have been tested. DrewTech Mongoose, Scanmatik, Ford VCM2 do not support the required functions and cannot be used

Fixes and improvements:
- BMW Marelli MBC1(BMSE) added automatical reset adaptation values at the end of programming.
- Kia/Hyundai Continental SIM2K-24x made better detection for SIM2K-242 ECU

by **ECUTools** » Fri May 22, 2020 4:18 pm

➡❗KESSV2: Bosch ME17.2.42 BMS-O now available via OBD!❗⬅

⭐The Alientech technicians have been focusing on the BMW most powerful two wheels: start programming the ECU Bosch ME17.2.42 BMS-O through OBD-II with the 724 KESSv2 protocol!

⭐The new K-Suite update allows OBD-II programming with KESSv2 and the virtual reading of the S 1000 RR and R 1250 models of the latest two wheels vehicles of the German car manufacturer BMW.

✅New vehicles now supported:

- BMW Motorrad S 1000 RR
- BMW Motorrad R 1250

✅ECUs supported via OBD2 (virtual reading, writing):

- BMW Motorrad R 1250 GS Adventure K51 Bosch ME17.2.42 BMS-O
- BMW Motorrad R 1250 GS K50 Bosch ME17.2.42 BMS-O
- BMW Motorrad R 1250 R K53 Bosch ME17.2.42 BMS-O
- BMW Motorrad R 1250 RS K54 Bosch ME17.2.42 BMS-O
- BMW Motorrad R 1250 RT K52 Bosch ME17.2.42 BMS-O
- BMW Motorrad S 1000 RR K67 Bosch ME17.2.42 BMS-O

by **ECUTools** » Mon May 25, 2020 4:46 pm

➡❗Combiloader Update ver 2.16.7447❗⬅

⚡️ NEW MODULE - ❗Continental SID310 Renault❗

Software/map area reading/writing via OBD. Continental SID310 1.5L and 2.3L.

⚡️ NEW MODULE - ❗Bosch EDC17C84 Renault❗

Software/map area reading/writing via OBD. Bosch EDC17C84 1.6L.

⚡️ NEW MODULE - ❗Continental EMS3150 Renault❗

Software/map area reading/writing via OBD. Map area checksum correction, identification.

⚡️ NEW MODULE - ❗Continental DC4 TCM Renault❗

Software/map area reading/writing of DC4 TCMs in Renault vehicles via the diagnostic connector.
Map area checksum correction, identification.

⚡️ NEW MODULE - ❗Ford Extra (SID208/SID209 (CK4A))❗

Extension for SID206/208/209/211 Ford J2534 module. Full access to FLASH/EEPROM of SID208/SID209(CK4A) ECUs.

⚡️ NEW MODULE - ❗Renault Extra❗

Extension for Renault modules. Full access to FLASH/EEPROM of EMS3120/EMS3125/EMS3150/EMS3155/SID310/SID307 ECUs.

by **ECUTools** » Tue May 26, 2020 1:56 pm

➡❗FLEX ver 4.9.0.0 released - OBD solutions for VAG group: Continental DQ500 as a FLEX exclusive, DCM6.2V (MY2019) & Simos16.1❗⬅

⭐MAGICMOTORSPORT has released an exclusive Full OBD solution for Continental DQ500 TCUs for VAG group vehicles. As of now, it is possible to program this TCU directly from the vehicle’s diagnostic socket, accessing all the memories present in its mechatronics (Maps Zone, Internal EEprom, Full backup / Cloning).

⭐New OBD solutions have also been released in this 4.9.0.0 FLEX SW version for programming Continental DCM6.2 (MY 2019) and Simos16.1 ECUs installed in cars from the VAG group like for example Audi Q2 1.6 MY 2019 and Audi S5 3.0 TFSI MY 2014 just to name a few.

✅New Protocols added:

- Audi Continental DQ500 OBD Full : Read/Write/Checksum Maps Zone – Read/Write Internal EEprom – Fullbackup/Cloning
- Audi Continental Simos16.1 OBD: Virtual Read/Write/Checksum – Write Update
- Audi Delphi DCM6.2V ( MY2019 ) OBD: Virtual Read/Write/Checksum – Write Update
- Cadillac Delco E38 OBD: Read/Write/Checksum
- Chevrolet Delco E38 OBD: Read/Write/Checksum
- Volkswagen (VW) DCM6.2V ( MY 2019 ) OBD: Virtual Read/Write/Checksum – Write Update
- Volkswagen (VW) Simos16.1 OBD: Virtual Read/Write/Checksum – Write Update
- Volkswagen (VW) Continental DQ500 OBD Full: Read/Write/Checksum Maps Zone Read/Write Internal EEprom – Fullbackup/Cloning
- Toyota Denso 276122-092 AUD: Read/Write/Checksum Internal Flash

✅Bugfixes:

- PSA BOSCH EDC16C34 OBD writing improved
- BMW Continental MSD80 identifications issue fixed

✅Software improvements:

- Improved Honda Keihin TC1782 OBD UDS Compatibility
- Ford BOSCH EDC17CP42 new OBD type supported
- Audi Continental SIMOS8.2 new OBD type supported
- Renault Continental EMS3155 new OBD KWP type supported
- Nissan Continental SID309 new OBD KWP type supported

by **ECUTools** » Tue Jun 02, 2020 1:55 pm

➡❗PCMflash Update - ver 1.2.1 ❗⬅

⚡️NEW MODULE ❗Module 75 - Ford Power Stroke❗

✅Ford Truck: 6.7L Power Stroke V8 (EDC17CP05) [BC3A] [RD/WR/CK]
✅Ford Truck: 6.7L Power Stroke V8 (EDC17CP05) [FC3A] [RD/WR/CK]
✅Ford Truck: 6.7L Power Stroke V8 (EDC17CP65) [HC3A] [RD/WR/CK]

⚡️NEW MODULE ❗Module 76 - Kia/Hyundai Gearbox❗
✅Kia/Hyundai: MG7.9.8/MEG17.9.12 Gearbox (ST10F275/TCU) [RD/WR]
✅Kia/Hyundai: TC14 Gearbox (MPC562/TCU) [RD/WR/CK]
✅Kia/Hyundai: TC60/TC80/ME(D)G17.9.8/13 Gearbox (SH72549/TCU) [RD/WR/CK]
✅Kia/Hyundai: SIM2K-24x/341 Gearbox (TC1766/TCU) [RD/WR/CK]
✅Kia/Hyundai: SIM2K-24x Gearbox (TC1738/TCU) [RD/WR/CK]
✅Kia/Hyundai: SIM2K-341 Gearbox (TC1738/TCU) [RD/WR/CK]

⭐MODULE UPDATE ❗Module 12 - Honda/Acura CAN-bus❗ now supports
✅AT/CVT/DCT (Hitachi SH725x3/2048KB) [RD/WR/CK]

⭐MODULE UPDATE ❗Module 21 - Ford USA❗ now supports
✅Expedition, Navigator 5.4L (Bosch ME9.8/2048KB) [RD/WR/CK]
✅F-150 5.4L (Bosch MEG9.8.1/2536KB) [RD/WR/CK]

⭐MODULE UPDATE ❗Module 22 - Renault❗ now supports
✅ Nissan: Juke 1.2T EMS3155 (TC1782/2560KB) [RD/WR/CK]

⭐MODULE UPDATE ❗Module 24 - Mitsubishi CAN-bus❗ now supports
✅Colt RallyArt 1.5T (MH8104F/512KB) [RD/WR/CK]
✅Mitsubishi: L200 2.4L MT (2008-) (MH8302F/512KB) [RD/WR/CK]

⭐MODULE UPDATE ❗Module 29 - Ford PWM❗ now supports
✅EEC-V 216K (EEC-V) [RD/WR/CK]

⭐MODULE UPDATE ❗Module 38 - Renault K-Line❗ now supports
✅Renault: Sirius 35 (C167/512KB) [RD/WR/CK]

⭐MODULE UPDATE ❗Module 41 - Scania EMS S6/EDC S6❗ now supports
✅Scania EMS/EDC S6 250Kbps (MPC555) [RD/WR/CK]

⭐MODULE UPDATE ❗Module 44 - Scania EMS S7/S8/EMD1❗ now supports
✅Scania EMS S8/EMD1 500Kbps (MPC5566) [WR/CK]

⭐MODULE UPDATE ❗Module 47 - Mitsubishi Gearbox CAN-bus❗ now supports
✅CVT ASX/Outlander 3/Eclipse Cross 1.5T/2.0L/2.4L (MH8115F/1.25MB) [WR/CK]
✅AWD Outlander 3/Eclipse Cross (MH8104F/512KB) [RD/WR/CK]
✅ACD Lancer RallyArt X (2009-2011) (MH8104F/512KB) [RD/WR/CK]

⭐MODULE UPDATE ❗Module 48 - VAG ME(D)17 UDS❗ now supports
✅2.0L, 2.5L, 4.0L TSI, 4.2L FSI (MED17.1/17.1.1/17.1.10/17.1.62) [VR/WR/CK]
✅5.2L FSI Master/Salve (MED17.1.1) [VR/WR/CK]

⭐MODULE UPDATE ❗Module 51 - China❗ now supports
✅Chery 2019+ ME17 (ME17.8.8) [RD/WR/CK]
✅Great Wall/Haval MED17 (MED17.8.10) [RD/WR/CK]
✅Geely MED17 (MED17.8.10) [RD/WR/CK]
✅MG MED17 (MED17.8.10) [RD/WR/CK]
✅Chevrolet 1.5L Aveo/Sail 3 (ME17.8.8) [RD/WR/CK]

⭐MODULE UPDATE ❗Module 53 - Infineon Tricore BSL❗ now supports
✅JLR SID208, PSA EDC17C60, PSA MED17.4.4, Delphi CRD3/CRD3P

⭐MODULE UPDATE ❗Module 59 - Renault/Nissan UDS❗ now supports
✅Nissan: 0.66L, 1.6L Hitachi UDS (R7F701205/2MB) [RD/WR/CK]

⭐MODULE UPDATE ❗Module 61 - Kia/Hyundai CPGDSH/CPEGD❗ now supports
✅Kia/Hyundai: 1.4T, 1.6L (CPEGD2.20.3/CPEGD2.20.4/UDS) [RD/WR/CK/UNLOCK]

⭐MODULE UPDATE ❗Module 69 - Mercedes-Benz MED17/EDC17❗ now supports
✅EDC17C43/CP46/CP57/CP60/C66 [RD/WR/CK]

⭐MODULE UPDATE ❗Module 70 - Jeep EDC17❗ now supports
✅2.8L CRDI (EDC17CP27)[RD/WR/CK]

⭐MODULE UPDATE ❗Module 71 - Bosch MEDC17 Bootloader❗ now supports
✅PSA EDC17C60, PSA MED17.4.4

❗ Virtual reading is now performed from the server❗