➡❗bFlash Update V2007C❗⬅

bFlash now supports:

⭐VAG MD1/MG1⭐ via OBD!

✅Calibration writing - 45 seconds;
first flash - between 5 min to 7 min depending on the platform; reading - virtual reading.

✅Back to stock feature is available!

✅Flash counters are reset and fixed to 0 after first flash

✅The following ECUs are covered:

MG1CS001 MPC5777
MG1CS002 MPC5777
MG1CS011 MPC5777
MD1CP004 MPC5777

⚡️NEW MODULE ❗License 74 - GM ECU ACDelco E39A Read/Write_MPC55xx_Full_Flash_OBDII❗

✅Full flash reading, map area writing via OBD. No checksum correction.

✅Full flash readiing/writing; EEPROM reading/writing (EEPROM and VID).

✅Password reading; ECU cloning on the bench. Recovery mode: allows to recover the ECU which do not respond via CAN bus or bricked ECUs. Recovery is possible only when there is the ECU password.

✅Suggested car list:

BUICK LaCrosse
BUICK Regal
BUICK Verano
CADILLAC ATS
CADILLAC SRX
CADILLAC XTS
CHEVROLET Camaro
CADILLAC Impala
CADILLAC Malibu
GMC Canyon
OPEL Insignia

❗Attention! The license will be available after August 13th.❗

➡❗FLEX ver 5.0.0.0 released - OBD solutions for BMW and MINI, VAG, KIA, HYUNDAI❗⬅

⭐MAGICMOTORSPORT has just released new OBD solutions for the programming of BOSCH MEVD17 ECUs mounted on BMW petrol cars like the Z4 (E89) 28i sDrive and Mini Countryman (R60) 1.6, as well as for diesel vehicles like the BMW 3 series (E91) 318d that mounts BOSCH EDC17 ECUs.

⭐This new FLEX 5.0.0.0 update lets you work in OBD on BOSCH EDC16 / MED9 CAN and K-line ECUs installed in VAG group vehicles like the Volkswagen Crafter 2.5 R5 TDI and Audi TT (8J) 2.0 TFSI but it also includes newer VAG group vehicles like the Audi A4 (B8) 2.0 TDI and Volkswagen Scirocco (III) 1.4 TSI equipped with a BOSCH MEDC17 TP2.0 ECU. The update also includes OBD solutions for KIA and Hyundai vehicles that mount BOSCH MEDC17 ECUs.

✅New Protocols added

✅Bugfixes:

- PSA MEV17.4.2 reading issue fixed
- Toyota DENSO writing issue fixed
- BMW Continental MSV90 BENCH identification issue fixed
- Porsche Continental SDI9 OBD identification issue fixed
- PSA BOSCH MG1CS042 bench writing issue fixed
- MB BOSCH MED17.7.1 writing issue fixed
- MB EDC17CP10 BENCH ExtFlash writing issue fixed
- PSA DCM6.2C added new CRC algo
- FAL Marelli 8F3 OBD/BENCH reading improved
- VAG Simos18 OBD writing maps improved

✅Software improvements:

- Added back to stock on FORD SID209 protocols
- MB BOSCH EDC17C66 added new type
- Added new version of VAG BOSCH EDC17CP44

CombiLoader with the additional brand new SIMOS12 VAG (J2534) module is up!

It offers:

⚡ Reading / Writing of SIMOS12 installed in VAG vehicles

⚡ Bench work without opening the ECU

⚡ Identification, errors reading/reset

⚡ Automatic checksum calculation

⚡ Full reading / writing excluding OTP area

You can find it here!

.: ⚡ bFlash Update V2008A ⚡ :.

bFlash now supports:

⚡ MG1CA007 ⚡ for the Indian Challenger!

⚡ Writing takes around 30 seconds.
⚡ Reading takes around 45 seconds.
⚡ On the bench!
⚡ You can use the help function in bFlash and it will show you the pinout of the ECU.

The following ECUs are covered:

MG1CA007 MPC5898N

⭐ https://ecutools.eu/chip-tuning/bflash-master/
⭐ https://ecutools.eu/chip-tuning/bflash-slave/

:!: New VF2 Flasher :!:

The tool supports:

> operation in Boot Mode
> operation in Bench Mode
> operation through the OBD2 diagnostic connector

VF2 Flasher is a 7-inch tablet with a touch screen!

It has:

> built-in power supply with protection against improper connection and short circuits
> an innovative user interface with built-in instructions for connecting to the ECU

It allows you to work autonomously without the use of a PC!

Which significantly reduces the risks of third-party drivers, operating system and other software interference in the programming process.

Contents of delivery:

- VF2 Flasher tool MASTER
- Power adapter with EU cord
- Set of flexible banana cables and blue boot pen
- Regular IDC16
- Multicolored IDC16
- IDC16-IDC10 flat cable adapter
- Set of 5 soldering BDM adapters
- Set of soldering Toy1 and Toy2 adapters
- VF2 Flasher OBD cable
- USB cable type A to type B, 1m
- ESD protective shielding bag
- VF2 Flasher plastic protective foam padded case

⚡ https://ecutools.eu/chip-tuning/vf2-fla ... er-custom/
⚡ https://ecutools.eu/chip-tuning/vf2-fla ... stom-full/

❗ Mercedes AMG: increasing the performance with K-TAG! ❗

ECU BOSCH MG1CP002 REMAPPING IN SERVICE MODE

⭐ Added vehicles: ⭐
Mercedes AMG GLC43 / GLE43 / GT43 / GT53 Coupè

The Alientech technicians have focused on the latest generation ECUS to give you the chance to work in complete safety and efficiency on the most powerful vehicles, without opening the ECU!

The new K-TAG update allows you to act quicker and more efficiently. You can offer more services and attract more customers!

✅ New vehicles supported by K-TAG (reading, writing):

Mercedes-Benz A45 AMG W177 2.0 4Matic+ 8AT
Mercedes-Benz A45 AMG W177 S 2.0 4Matic+ 8AT
Mercedes-Benz C43 AMG A205 3.0 4Matic+ 9AT
Mercedes-Benz C43 AMG C205 3.0 4Matic+ 9AT
Mercedes-Benz C43 AMG S205 3.0 4Matic+ 9AT
Mercedes-Benz C43 AMG W205 3.0 4Matic+ 9AT
Mercedes-Benz CLS53 AMG C257 3.0 4Matic+ 9AT
Mercedes-Benz CLS-Class C257 3.0 4Matic 9AT
Mercedes-Benz E43 AMG C238 3.0 4Matic 9AT
Mercedes-Benz E43 AMG W213 3.0 4Matic 9AT
Mercedes-Benz E53 AMG C238 3.0 4Matic+ 9AT
Mercedes-Benz E53 AMG W213 3.0 4Matic+ 9AT
Mercedes-Benz GLC43 AMG C253 3.0 4Matic 9AT
Mercedes-Benz GLC43 AMG X253 3.0 4Matic 9AT
Mercedes-Benz GLE43 AMG C292 3.0 4Matic 9AT
Mercedes-Benz GLE43 AMG W166 3.0 4Matic 9AT
Mercedes-Benz GT43 AMG Coupè 4 X290 3.0 4Matic+ 8AT
Mercedes-Benz GT53 AMG Coupè 4 X290 3.0 4Matic+ 8AT Mercedes-Benz S-Class C217 3.0 4Matic 9AT
Mercedes-Benz S-Class W222 3.0 4Matic 9AT
Mercedes-Benz SLC43 AMG R172 3.0 4Matic 9AT

⭐ Furthermore, the ECU ❗Bosch MG1CS015 equipped on Ford F-150 3.5 EcoBoost❗ has been added to the K-TAG supported list! ⭐

☼ https://ecutools.eu/chip-tuning/alientech-k-tag-master/
☼ https://ecutools.eu/chip-tuning/alientech-k-tag-slave/

❗ PRE-SALE License 75 ❗ - GM_TCM_6T30_6T35_6T40_6T45_6T50_Full_Flash_OBDII

⭐ Full flash reading/writing; EEPROM reading/writing.

✅ Allows to not reflash the boot sector; cloning.
✅ Even though full flash reading / writing is supported via OBD, it is recommended to perform the cloning procedure on the bench.
✅Reading/writing time is 2-15 min depending on the J2534 device manufacturer.

Suggested car list:

CHEVROLET Orlando
CHEVROLET Cruze
CHEVROLET Malibu
CHEVROLET Captiva

OPEL Astra J
OPEL Antara

⭐❗ The license will be available after September 9, 2020 ❗⭐

⚡ https://ecutools.eu/odometrs/mdflasher/ ... ash-OBDII/


❗❗ BitBox Updates and Additions!❗️❗

New families:

☑️ MB Delphi CRD3.XX TC1793 added to module MB Delphi Diesel CAN with reading/writing and checksums calculation
☑️ Haval Bosch MED17.8.10 added to module China Bosch Petrol with bench reading/OBD writing and checksums calculation. Now available for TESTS

Fixes and improvements:

✅ Kia/Hyundai Continental SIM2K-141/341 fixed detection and reading will not be allowed for unknown ECU types
✅ Renault Continental EMS3125 fixed writing for some ECU types
✅ China Delphi MT92.1 fixed checksums calculation for some ECU types
✅ Fixed CVN detection for Toyota Denso Gen2 CAN ECUs during identification
✅ Beta ENDURO motorbikes with Continental M3C ECUs are now supported with FID:195

⚡ https://ecutools.eu/chip-tuning/bitbox/

❗️Second phase launch for BMW bFlash! Now DKG436.g1! ❗️

✅ Writing time is around 30 seconds
✅ Reading takes around 2 minutes

You can use the help function in bFlash and it will show you the pinout of the ECU.

Control units:

☑️ BMW Temic DK436.g1 TC1766

Flashing, datalogging & diagnostics? All in one tool!

⭐ https://ecutools.eu/chip-tuning/bflash-master/
⭐ https://ecutools.eu/chip-tuning/bflash-slave/