problem ECU file 318D , request 318D 2008 Ori

by **darknight** » Sun Aug 02, 2020 2:48 pm

Hello
I have a problem here that I don't know why.

I have a 318D N47 143cv 2008
it has already been reprogrammed for my hands.

I don't have the original ECU file.
on the ECU itself, the following numbers are on the sticker.

HW 0281015042
and DDE 7811701

through KESS v2, I am trying to put a remap that was made from an original file of a 318D N47 2008, but contains different HW as it is in the image.

and it gives error at the end, says corrupt or incorrect file.

I also tried a file from Ecubin with the numbers written on my ECU , SW its diferrent , but it returns the same error

what could it be?
thank you

by **TTawa** » Sun Aug 02, 2020 9:49 pm

Chinese KESS you will not write this ECU

by **darknight** » Mon Aug 03, 2020 1:01 am

is that right?
is the problem with Kess being a clone?
if it is an original KEss already give this maps?

thanks

by **Lambda1** » Mon Aug 03, 2020 6:50 am

No clone talk...
Ori kess => VR Read => no problem.

by **darknight** » Mon Aug 03, 2020 9:02 am

you can explain to me. I don't understand much about it. but then the only solution to get this changed map I have, is using an original kess, is that it? with this clone, it is not possible. did I understand well?

Thanks

by **NRT** » Fri Aug 07, 2020 10:34 am

darknight wrote:you can explain to me. I don't understand much about it. but then the only solution to get this changed map I have, is using an original kess, is that it? with this clone, it is not possible. did I understand well?

Thanks

You must use correct and matching HW and SW. and goodluck with clone tools... Take it to a professional tuner with genuine tools, and redo it properly or take the risk of causing damage.