EDC16C34 407 1.6HDI Mappack & Advices

by **Ohvalve** » Fri Aug 14, 2020 2:10 pm

Hi,

I worked on Tdi PD engine, but i havent any experince on CR engines. Want to try and learn on my friends car.
Its a 2008 Peugeot 407 1.6Hdi 110hp EDC16C34 Bosch number 393451. I found some mappack for this car but there arent suitable with file.

Can someone share map pack or tips for this engine? Ori file attached.
Thanks

by **Ohvalve** » Mon Aug 17, 2020 12:12 pm

Anybody help?

by **joao-ml** » Mon Aug 17, 2020 3:06 pm

Hi,

I have this damos for that ECU see if it helps.

And also for this ecu's there's plenty of post with information about map location, factors and offsets.
I will take a look at your file and try to help you

by **joao-ml** » Mon Aug 17, 2020 3:41 pm

Some maps for you to start:

1C166E - Driver's Wish (7x10) (After this one you will se more driver's wish maps)
1C555C - EGR Map (I'm not 100% sure)
1C590E - Upper Egr hysterisis (12x1) (following this is the lower hysterisis)
1CCDFA - Torque Limiter (19x1)
1CCEBC - Torque Limiter (16x1)
1CCF68 - I.Q Limiter by temp (there are 2 more next to this one)
1CDC34 - Lambda Map
1CE352 - Nm to I.Q. (there are 2 more Nm to IQ maps after this)
1CF318 - Gear depedent torque limiters (15x1) (there are 6 after this one)
1D0860 - SOI (there's one more after this)
1E4506 - Duration (some more next to it)
1E7B60 - N75 map (there are 2 more)
1E9D40 - Turbo map (there are more after this and also the turbo limiters)

This already should help you for stage 1

by **Ohvalve** » Tue Aug 18, 2020 6:37 am

joao-ml wrote:Some maps for you to start:

1C166E - Driver's Wish (7x10) (After this one you will se more driver's wish maps)
1C555C - EGR Map (I'm not 100% sure)
1C590E - Upper Egr hysterisis (12x1) (following this is the lower hysterisis)
1CCDFA - Torque Limiter (19x1)
1CCEBC - Torque Limiter (16x1)
1CCF68 - I.Q Limiter by temp (there are 2 more next to this one)
1CDC34 - Lambda Map
1CE352 - Nm to I.Q. (there are 2 more Nm to IQ maps after this)
1CF318 - Gear depedent torque limiters (15x1) (there are 6 after this one)
1D0860 - SOI (there's one more after this)
1E4506 - Duration (some more next to it)
1E7B60 - N75 map (there are 2 more)
1E9D40 - Turbo map (there are more after this and also the turbo limiters)

This already should help you for stage 1

Thank you i will try.

by **gesch** » Thu Jan 14, 2021 9:25 pm

joao-ml wrote:Some maps for you to start:

1C166E - Driver's Wish (7x10) (After this one you will se more driver's wish maps)
1C555C - EGR Map (I'm not 100% sure)
1C590E - Upper Egr hysterisis (12x1) (following this is the lower hysterisis)
1CCDFA - Torque Limiter (19x1)
1CCEBC - Torque Limiter (16x1)
1CCF68 - I.Q Limiter by temp (there are 2 more next to this one)
1CDC34 - Lambda Map
1CE352 - Nm to I.Q. (there are 2 more Nm to IQ maps after this)
1CF318 - Gear depedent torque limiters (15x1) (there are 6 after this one)
1D0860 - SOI (there's one more after this)
1E4506 - Duration (some more next to it)
1E7B60 - N75 map (there are 2 more)
1E9D40 - Turbo map (there are more after this and also the turbo limiters)

This already should help you for stage 1

Thanks!