Chip Tuning Tools

by **ECUTools** » Tue Sep 29, 2020 9:58 am

❗️PRE-SALE License 77 - GM ECU ACDelco E87❗️

✅ Full FLASH reading, map area writing via OBD without checksum correction
✅ Full FLASH reading/writing
✅ EEPROM reading/writing (EEPROM and VID unit)
✅ Password reading
✅ Recovery mode: to recover ECUs that do not respond via CAN. Possible only if you have the ECU password.

❗️It is recommended to clone the ECU on the bench.

Suggested car list:

☑️ Chevrolet Cruze 1.7 VCDI
☑️ Chevrolet Trax 1.7 VCDI
☑️ Opel Astra(J) 1.7 VCDI
☑️ Opel Corsa(D) 1.7 VCDI
☑️ Opel Meriva(B) 1.7 VCDI
☑️ Opel Mokka 1.7 VCDI

The license will be available after 17.10.2020!

⚡ License 77

by **ECUTools** » Tue Sep 29, 2020 10:43 am

➡️ FLEX 5.3.0.0 Boot and Bench solutions

For Continental SID603 and Magneti Marelli automatic transmissions

New protocols added:

✅ FORD Continental SID603 12V Boot: Read / Write / Checksum Maps; Read / Write IntEeprom; Read / Write ExtEeprom; Full Backup
✅ HONDA BOSCH ME17.9.55 Bench: Read / Write / Checksum Internal Flash; Read / Write IntEeprom; Full Backup
✅ HONDA BOSCH ME17.9.55 Boot: Read / Write / Checksum Internal Flash; Read / Write IntEeprom; Full Backup
✅ FORD BOSCH EDC17CP05 Bench: Read / Write / Checksum Internal Flash; Read / Write IntEeprom; Full Backup
✅ FORD BOSCH EDC17CP05 Boot: Read / Write / Checksum Internal Flash; Read / Write IntEeprom; Full Backup
✅ ISUZU DENSO 275700-7082 Bench: Read / Write Maps; Read / Write IntEeprom; Full Backup
✅ TOYOTA – BOSCH – EDC16C10 Obd: Read / Write / Checksum Maps; Recovery
✅ Alfa Romeo Marelli 8TDW Boot: Read / Write / Checksum Internal Flash; Read / Write ExtEeprom; Full Backup
✅ Alfa Romeo Marelli 8TDF Boot: Read / Write / Checksum Internal Flash; Read / Write ExtEeprom; Full Backup
✅ FORD – BOSCH – ME17.0.3 Bench: Read / Write / Checksum Internal Flash; Read / Write IntEeprom; Full Backup
✅ FORD – BOSCH – ME17.0.3 Boot: Read / Write / Checksum Internal Flash; Read / Write IntEeprom; Full Backup
✅ VOLVO – BOSCH – EDC15C11 Boot: Read / Write External Flash; Read / Write ExtEeprom; Full Backup

Software improvements:

☑️ Added New CRC for EDC17C53
☑️ Added New CRC GPEC2A Dodge
☑️ Added New for PORSCHE BOSCH MG1CP007
☑️ Added VAG TEMIC DQ200G2.1 Bench support (Golf 8 2020)

Full vehicle list

FLEX Master
FLEX Slave

by **ECUTools** » Tue Sep 29, 2020 1:58 pm

HP tuners update!

HP tuners software now supports:

✅ The 2013-2018 Porsche 991 GT3 and GT3 RS
Required: MPVI2, the latest version of VCM Suite Beta software, and an internet connection
Licensing cost is 10 credits

✅ The 2012-2017 Ford Fiesta 1.0L Ecoboost
Required: MPVI2
Licensing cost is 2 credits

✅ The 2013-2019 Ford Fiesta ST 1.5 and 1.6L
Required: an HP Tuners interface
Licensing cost is 2 credits

✅ 2019 LT5 Crate Engine
Required: MPVI2, software version 4.3 or newer, an internet connection
Licensing cost is 6 credits

✅ 16-18 Ford Focus RS 2.3L
Required: an HP Tuners interface
Licensing cost is 2 credits

⚡ HP Tuners MPVI2

by **ECUTools** » Thu Oct 01, 2020 10:42 am

❗️ ACDELCO E92: read, write, and clone with K-TAG! ❗️

The new protocol introduces:
✅ Reading
✅ Writing
✅ Cloning

This allows you to repair and recalibrate ACDELCO E92 ECU, specifically on Cadillac, Chevrolet, GMC

➡️ The ECU connection via BAM line

☑️ Cadillac CTS-V 6.2 V8 DI Supercharged
☑️ Cadillac Escalade 6.2 V8 EcoTec3
☑️ Cadillac Escalade 6.2 V8 EcoTec3 10AT
☑️ Cadillac Escalade 6.2 V8 EcoTec3 6AT
☑️ Cadillac Escalade 6.2 V8 EcoTec3 8AT
☑️ Cadillac Escalade ESV 6.2 V8 EcoTec3
☑️ Chevrolet Silverado 6.2 V8 EcoTec3
☑️ Chevrolet Silverado 1500 6.2 V8 EcoTec3
☑️ Chevrolet Suburban 6.2 V8 EcoTec3
☑️ Chevrolet Tahoe 6.2 V8 EcoTec3
☑️ GMC Sierra 1500 6.2 V8 EcoTec3
☑️ GMC Yukon 6.2 V8 EcoTec3
☑️ GMC Yukon XL 6.2 V8 EcoTec3

This protocol is added to the number 741 of KESSv2

➡️ K-Tag Master
➡️ K-Tag Slave

by **ECUTools** » Wed Oct 07, 2020 11:28 am

❗️ Magneti Marelli: Bench + Boot ❗️

➡️ 8GMF - 8GMK - 8GSW - 8GSF - 8GMW - 8GML - 9GF - MJD8F2 - MJD8F3 - MJD9DF

Autotuner is now able to perform the following operations:

☑️ Bench Read
☑️ Bench Write
☑️ Boot Read
☑️ Boot Write

On the engines ECUs:

✅ 1.4 Multi-Air 8GMF
✅ 1.4 Multi-Air 8GMK
✅ 1.4 Multi-Air 8GMW
✅ 1.4 Multi-Air 8GML
✅ 0.9 Twin-Air 8GSW
✅ 0.9 Twin-Air 8GSF
✅ 1.2 8V 9GF
✅ 1.4 16vr 9GF
✅ 1.3 HDI MJD8F3
✅ 1.3 Mjet MJD8F3
✅ 2.3 JTDm MJD8F3
✅ 1.3 Mjet EU6 MJD9DF
✅ 2.3 Multijet2 (Euro6) MJD9DF
✅ 1.3 HDI MJD8F2 BOOT ONLY ❗️
✅ 1.3 Mjet MJD8F2 BOOT ONLY ❗️

⭐️ Autotuner Tool Master
⭐️ Autotuner Tool Slave

by **ECUTools** » Thu Oct 08, 2020 10:05 am

➡️⭐️ Toyota Gen: FULL OBD in KESSv2! ⭐️

Read and write via OBD the new Toyota RAV4 2.5 VVT-iE Hybrid equipped with ECU Denso and the microcontroller R7F701202.

Works with models:
Toyota Auris | Toyota Camry | Toyota Corolla | Toyota RAV4 | Lexus ES | Lexus UX

List of vehicles:

✅ Daihatsu Altis AXVH7x 2.5 VVT-iE Hybrid 16v E-CVT
✅ Daihatsu Altis 2.5 VVT-iE 16V CVT
✅ Daihatsu Altis 2.5 VVT-iE Hybrid 16v E-CVT
✅ Lexus ES AXZA10 ES250 2.5 VVT-iE 16v CVT
✅ Lexus ES AXZA10 ES260 2.5 VVT-iE 16v CVT
✅ Lexus ES AXZA10 ES300h 2.5 VVT-iE Hybrid 16v E-CVT
✅ Lexus ES AXZH10 ES300h 2.5 VVT-iE Hybrid 16v E-CVT
✅ Lexus UX MZAA10 UX200 2.0 VVT-iE
✅ Lexus UX MZAH1x UX250h 2.0 VVT-iE Hybrid 16v -CVT
✅ Toyota Auris MZEA12 2.0 VVT-iE 16v CVT
✅ Toyota Auris 2.0 VVT-iE 16v Hybrid E-CVT
✅ Toyota Avalon AXXA5x 2.5 VVT-iE
✅ Toyota Avalon AXXH5x 2.5 VVT-iE Hybrid 16v E-CVT
✅ Toyota Camry AXVA70 2.5 VVT-iE 16v CVT
✅ Toyota Camry AXVA7x 2.5 VVT-iE 16V CVT
✅ Toyota Camry AXVH7x 2.5 VVT-iE Hybrid 16v E-CVT
✅ Toyota Camry 2.5 VVT-iE Hybrid 16v E-CVT
✅ Toyota C-Hr MAXA10 2.0 VVT-iE 16v CVT
✅ Toyota C-Hr MAXH10 2.0 VVT-iE Hybrid 16v E-CVT
✅ Toyota Corolla MZEA12 2.0 VVT-iE 16v CVT
✅ Toyota Corolla MZEH12 2.0 VVT-iE Hybrid 16v E-CVT
✅ Toyota Crown AZSH2x 2.5 VVT-iE Hybrid 16v E-CVT
✅ Toyota Harrier AXUH70 2.5 VVT-iE Hybrid
✅ Toyota Highlander AXUH70 2.5 VVT-iE Hybrid
✅ Toyota Kluger AXUH70 2.5 VVT-iE Hybrid
✅ Toyota Levin MZEA12 2.0 VVT-iE 16v CVT
✅ Toyota Levin MZEH12 2.0 VVT-iE Hybrid 16v E-CVT
✅ Toyota RAV4 AXAA5x 2.5 VVT-iE 16V CVT
✅ Toyota RAV4 AXAL5x 2.5 VVT-iE Hybrid 16v E-CVT
✅ Toyota RAV4 AXAL5x 2.5 VVT-iE Hybrid 16V E-CVT AWD-i
✅ Toyota RAV4 AXAP5x 2.5 VVT-iE Plug-in Hybrid
✅ Toyota RAV4 XA50 2.0 16v CVT
✅ Toyota Venza AXUH70 2.5 VVT-iE Hybrid

⚡ KessV2 Master
⚡ KessV2 Slave

by **ECUTools** » Fri Oct 09, 2020 3:52 pm

❗️New modules for CombiLoader: Renault UDS❗️

⭐️ Continental EMS3155 ⭐️ 1.2T. Renault J2534
⭐️ Continental SID310 ⭐️ 1.5L and 2.3L. Renault J2534
⭐️ Bosch EDC17C84 ⭐️ 1.6L. Renault J2534

✅ Map area checksum correction, identification.

➡️ CombiLoader
➡️ Module Renault UDS

by **ECUTools** » Wed Oct 14, 2020 11:36 am

➡️❗️FLEX version 5.4.0.0: new OBD, BENCH, and BOOT Solutions❗️

✅ Reading in 8 minutes;
✅ Writing in 2 minutes and 30 seconds;

✅ OBD for DELPHI CRD11 equipped on Mercedes vehicles and more;
✅ Bench solutions for BOSCH ME7.0 and ME7.0.1 ECUs equipped on Volvo vehicles'
✅ Bootloader solutions for Magneti Marelli IAW5SF8, IAW5SF9, IAW5SFH equipped on FCA group vehicles;

New protocols added:

☑️ MB DELPHI CRD11 OBD: Read / Write / Checksum Maps
☑️ FCA BOSCH EDC15C5 OBD: Read / Write / Checksum / Recovery Maps
☑️ Volvo ME7.0.1 BENCH: Read / Write / Checksum Internal Flash; Read / Write ExtEeprom; Full Backup
☑️ Volvo ME7.0 BENCH: Read / Write / Checksum Internal Flash; Read / Write ExtEeprom; Full Backup
☑️ VAG BOSCH ME7.1 BOOT: Read / Write / Checksum Internal Flash; Read / Write ExtEeprom; Full Backup
☑️ PSA VISTEON DCU-102 BOOT: Read / Write / Checksum IntFlash
☑️ FCA Marelli IAW5SF8 (HW4xx) BOOT: Read / Write / Checksum IntFlash
☑️ IVECO Marelli IAW5SF8 (HW4xx) BOOT: Read / Write / Checksum IntFlash
☑️ FCA Marelli IAW5SF9 (HW4xx) BOOT: Read / Write / Checksum IntFlash
☑️ FCA Marelli IAW5SFH (HW4xx) BOOT: Read / Write / Checksum IntFlash
☑️ KIA CONTINENTAL SIM2K-259 BOOT: Read / Write / Checksum IntFlash, Read / Write / Checksum ExtEeprom, Full Backup

Bug fixes:

☑️ AUDI BOSCH MED9.1.2 – BDM external flash writing fixed
☑️ MB BOSCH MED17.7.3 OBD writing fixed

Software improvements:

☑️ Added New CRC for VW BOSCH MED17.1.62
☑️ Added New CRC FORD BOSCH MD1CS005
☑️ Added OBD support for EDC15VM + _29F800

Full vehicle list

⚡ FLEX Master
⚡ FLEX Slave

by **ECUTools** » Wed Oct 14, 2020 1:49 pm

⭐️ Want to get our news faster and easier? ⭐️

Subscribe to our Telegram Channel to not miss any news on the new products and updates!

by **ECUTools** » Thu Oct 15, 2020 2:58 pm

⭐️❗ ️KESSv2: for CA Magneti Marelli IAW 10GF ❗️⭐️

☑️ Reading and Writing via OBD
☑️ Remapping FIAT Argo, Cronos, Mobi, Renegade, Toro, and Uno

The KESSv2 protocol completes the functionality of the ➡️1473 K-TAG protocol ⬅️: to read the microcontroller SPC564A70 in BAM mode, it is necessary to have the Freescale activation.

The list of supported vehicles:

Magneti Marelli IAW 10GF

✅ FIAT Argo (X6H) (358) / 1.0 6v FireFly FLEX Magneti Marelli
✅ FIAT Argo (X6H) (358) / 1.3 8v FireFly FLEX Magneti Marelli
✅ FIAT Argo (X6H) (358) / 1.8 16v E.TorQ FLEX Magneti Marelli
✅ FIAT Cronos (X6S) (358S) / 1.3 8v FireFly FLEX Magneti Marelli
✅ FIAT Cronos (X6S) (358S) / 1.8 16v E.TorQ FLEX Magneti Marelli
✅ FIAT Mobi / 1.0 6v FireFly FLEX Magneti Marelli
✅ FIAT Toro / 1.8 16v E.TorQ FLEX Magneti MarelliRD
✅ FIAT Uno (327) / 1.0 6v FireFly FLEX Magneti Marelli
✅ FIAT Uno (327) / 1.3 8v FireFly FLEX Magneti Marelli
✅ Jeep Renegade BU / 1.8 16v E.TorQ FLEX Magneti Marelli

⭐️ KESS v2 Master
⭐️ KESS v2 Slave