EDC16CP34 DPF OFF - Still smokes sometime

by **juice** » Thu Oct 22, 2020 11:56 am

Hi guys, i just bought an Audi 3.0 TDI BUG engine.
DPF is cut out, i made 1D1760 switch to 0 and 7x12 matrix maps to 0.from 1F259E.
It looks like that sometimes, mostly on idle the car smoke kinda blue, but not always.
Injectors deviations are good, under +-1
I wrote correct IMA codes because they were not written in ECU.
I checked 72 - 76 channels now i have 0ms for now, i think it needs some km for adaption.
I also unplugged DPF pressure and temp sensors.

Step2) Over manual solution i hit ADS remover, which removes more DTS and limp mode off, the smoke is way more lower.
What do i have to do more ?

by **juice** » Sun Oct 25, 2020 11:15 am

Can somebody tell exactly the torque limiter maps ? 1D2A78 is automatically detected torque limiter 4x22 but before , there is some weird torque limiter like 4x13 and still remains some values after map which looks torque limiter

by **RPM freak** » Sun Oct 25, 2020 11:30 pm

1D2998 13x4 Motor protection torque with active boost

by **juice** » Mon Oct 26, 2020 11:08 am

RPM freak wrote:1D2998 13x4 Motor protection torque with active boost

Good, and numbers after? There are some numbers which looks like torque values, but i guess they are not considered since are not included in a map.
Regarding the smoke, after DPF switch still smokes, but when i do Lambda LSU switch oFF, then smoke reduces considerable.
I have no errors on lambda. Any thoughts ?