Chip Tuning Tools

by **ECUTools** » Fri Oct 16, 2020 9:50 am

❗️ BitBox 3.3.3 rev 1 Update ❗️

New families:

☑️ Mercedes Delphi CRD3.XX TC1793 BENCH mode;
Required: DrewTech CarDAQ+ device or other J2534 device supported 800 kbit/s CAN
☑️ PSA Continental SID208 TC1797 added to modules PSA Diesel CAN; reading/writing and checksums calculation
☑️ China Bosch M(E)7.9.71 added to module China Bosch Petrol; virtual reading/writing and checksums calculation
☑️ China Bosch MED17.8.10 Geely for module China Bosch Petrol in test mode with bench reading/writing and checksums calculation

Family fixes and improvements:

✅ China Delphi MT92 now supports MT92.1 with 2.5Mb flash size
✅ Renault Continental EMS3125: fixed some ECU types reading and writing
✅ SsangYong Delphi DCM3.2, DCM3.1 fixed entering programming mode
✅ China Delphi MT80 fixed changing speed bug
✅ Fixed writing on some ECUs for Renault EMS3155 and Renault SID310
✅ Fixed password reading on some Continental SIM2K-250 ECU types. Now family works with Bosch VCM2, but doesn't work with CarDAQ+
✅ Added some ECU types for detection Continental SIM2K-141/341 or Continental SIM2K-240

General fixes and improvements:

➡️ Totally remade working with J2534 devices in BitBox Core
➡️ Various UI and stability fixes

⭐️ BitBox
⭐️ BitBox Slave

by **ECUTools** » Fri Oct 23, 2020 2:35 pm

⭐️❗️ KESSv2 and K-TAG Update ❗️⭐️

KESSv2 and K-TAG: Continental SIMOS18 VAG: CVN added on thousands of vehicles!

CVN, meaning Calibration Verification Number, is the calibration checksum of the file written inside the ECU. The CVN control constitutes a method which can verify if the calibration of the ECU is consistent with the one supplied by the manufacturer of the vehicle. Thanks to the new functionalities, also by writing a Modified file, the CVN will always correspond to the Original File.

⭐️ The CVN number will be displayed in the ID protocol, in the area of the software version.

✅ KESSv2 — Protocol 473: Continental SIMOS18.1 — Continental SIMOS18.2 TC1791
✅ KESSv2 — Protocol 733 — Continental SIMOS18.10
✅ K-TAG — Protocol 830 — Continental SIMOS18.1 — Continental SIMOS18.2 — TC1791
✅ K-TAG — Protocol 1451 — Continental SIMOS18.10 TC1791

➡️ Vehicle list

⚡ KESS v2 Master
⚡ K-Tag Master

by **ECUTools** » Thu Oct 29, 2020 3:50 pm

❗️ KESSv2: Continental Simos 8.4 via OBD ❗️

✅ Virtual reading and writing via OBD

➡️ For the Continental Simos 8.4 VAG ECU, including Audi3.0 V6 CAKA and CAJA brand, which were produced starting from 2008

Continental Simos 8.4 VAG

☑️ Audi A6 C6 3.0 V6 TFSI Quattro
☑️ Audi A6 C6 3.0 V6 TFSI Quattro Tiptronic
☑️ Audi Q7 3.0 V6 TFSI Quattro
☑️ Audi S4 B8 3.0 V6 TFSI Quattro 6MT
☑️ Audi S4 B8 3.0 V6 TFSI Quattro 7AT
☑️ Audi S4 Avant B8 3.0 V6 TFSI Quattro 6MT
☑️ Audi S4 Avant B8 3.0 V6 TFSI Quattro 7AT
☑️ Audi S5 3.0 V6 24v TFSI quattro
☑️ Audi S5 3.0 V6 24v TFSI quattro S-Tronic

⚡️ Kess v2 Master
⚡️ Kess v2 Slave

by **ECUTools** » Fri Oct 30, 2020 10:56 am

❗️ FLEX version 5.5.0.0 is ready! ❗️

OBD and Boot solutions for Volvo, Renault and PSA

✅ OBD programming (unlock in bootloader) of the Delphi DCM7.1
✅ Boot protocols for TRW EMS2 ECUs equipped on Volvo and Renault branded cars
✅ Bench solutions for the recalibration of Bosch EDC17CV45 on Manitou vehicles

➡️ New protocols added:

✅ Toyota DCM7.1 BOOT: Read/Write/Checksum Internal Flash; Read/Write IntEeprom; Full Backup
✅ Toyota DCM7.1 OBD: Write/Checksum Maps; ( Unlock in BOOT mode )
✅ Opel DCM7.1 BOOT: Read/Write/Checksum Internal Flash; Read/Write IntEeprom; Full Backup
✅ Opel DCM7.1 OBD: Write/Checksum Maps; ( Unlock in BOOT mode )
✅ Peugeot DCM7.1 BOOT: Read/Write/Checksum Internal Flash; Read/Write IntEeprom; Full Backup
✅ Peugeot DCM7.1 OBD: Write/Checksum Maps; ( Unlock in BOOT mode )
✅ Citroen DCM7.1 BOOT: Read/Write/Checksum Internal Flash; Read/Write IntEeprom; Full Backup
✅ Citroen DCM7.1 OBD: Write/Checksum Maps; ( Unlock in BOOT mode )
✅ Alfa Romeo 8GMF MPC5553 BOOT: Read/Write/Checksum Internal Flash; Read/Write ExtEeprom; Full Backup
✅ FIAT 8GMF MPC5553 BOOT: Read/Write/Checksum Internal Flash; Read/Write ExtEeprom; Full Backup
✅ MANITOU BOSCH EDC17CV45 BOOT: Read/Write/Checksum Internal Flash; Internal Eeprom Read/Write; Full Backup Read/Write
✅ MANITOU BOSCH EDC17CV45 BENCH: Read/Write/Checksum Internal Flash; Internal Eeprom Read/Write; Full Backup Read/Write
✅ Renault EMS2 ( MPC5554 ) BOOT: Read/Write/Checksum Internal Flash; Read/Write ExtEeprom; Full Backup
✅ Volvo TRW EMS2 ( MPC5554 ) BOOT: Read/Write/Checksum Internal Flash; Read/Write ExtEeprom; Full Backup
✅ CF MOTO BOSCH ME17 BOOT: Read/Write/Checksum Internal Flash; Internal Eeprom Read/Write; Full Backup Read/Write

Bug fixes:

☑️ Fixed OBD read error for MB BOSCH ME9.7
☑️ Fixed OBD read error for VAG BOSCH MED9.1

Software improvements:

☑️ Added new CRC for CONTINENTAL SID603
☑️ Added new CRC for VAG CONTINENTAL SIMOS10.12

⭐️ Flex Master
⭐️ Flex Slave

by **ECUTools** » Tue Nov 03, 2020 1:54 pm

⭐️❗️ New CombiLoader ❗️⭐️

For SIMOS12.1/18.1 ECUs installed in VAG vehicles

✅ SIMOS12.1 ECUs - bench work without opening the ECU.
✅ SIMOS18.1 ECUs - bench work, opening the ECU is required.

➡️ Identification, errors reading/reset.
Automatic checksum calculation.
Full reading/writing excluding the OTP area.

❗️ Dialink is required

⭐️ SIMOS12/18 VAG
⭐️ CombiLoader

by **ECUTools** » Thu Nov 05, 2020 3:07 pm

❗️ K-Tag Update: 2020 Ford Super Duty in Service Mode ❗️

✅ Read and write the ECU Bosch MD1CP006 equipped on the new V8 Power Stroke by using the Service Mode.

You won’t have to open the ECU!

➡️ Ford Bosch MD1CP006

Ford F-250 Super Duty 6.7 V8 Power Stroke 6AT
Ford F-350 Super Duty 6.7 V8 Power Stroke 6AT
Ford F-450 Super Duty 6.7 V8 Power Stroke 6AT
Ford F-550 Super Duty 6.7 V8 Power Stroke 6AT

✅ Full vehicle list

⭐️ K-Tag Master
⭐️ K-Tag Slave

by **ECUTools** » Fri Nov 06, 2020 11:44 am

⭐️ HP tuners update! ⭐️

HP tuners software now supports:

► VW Golf 2.0T, years ranging from 04-19
Required: MPVI2
Licensing cost is 4 credits for the ECM and 4 credits for the TCM

► The 2013-2018 Porsche 991 GT3 and GT3 RS
Required: MPVI2, the latest version of VCM Suite Beta software, an internet connection
Licensing cost is 10 credits

► The 2013-2017 Mercedes A45 AMG 2.0L
Required: MPVI2
Licensing cost is 6 credits

► The 2013-2017 Mercedes GLA45 AMG
Required: MPVI2
Licensing cost is 6 credits

► The 2015-2020 Toyota Hilux 2.4L (2GD-FTV) and 2.8L (1GD-FTV) Diesel applications
Required: the latest version of VCM Suite Beta software, MPVI2, an internet connection
Licensing cost is 4 credits

► The 2012-2017 Mercedes G63 AMG
Required: MPVI2
Licensing cost is 6 credits

✅ HP Tuners MPVI2

by **ECUTools** » Tue Nov 10, 2020 1:33 pm

❗️ BitBox 3.3.4 rev. 1 Update ❗️

New modules: Ford Continental Diesel CAN introduced with the following families:

✅ FID255: Ford Continental SID208 TC1797 CAN (FULL OBD) - reading/writing/checksums calculation
✅ FID256: Ford Continental SID211 TC1791S CAN (FULL OBD) - reading/writing/checksums calculation
✅ FID259: Ford Continental SID206 MPC563+Ext.Flash - reading/writing/checksums calculation
✅ FID261: Ford Continental SID803A MPC561+Ext.Flash - reading/writing checksums calculation

Improvements and fixes:

☑️ Fixed some errors for Kia/Hyundai SIM2K-260 for reading/writing when password is already known
☑️ Fixed timeout error with erasing memory on MB Delphi CRD2.XX
☑️ Fixes for some ECU types for China Delphi DCM3.7AP during writing on vehicle

⭐️ For prices please refer to the links below:

⚡ BitBox
⚡ Ford Continental Diesel CAN

by **ECUTools** » Wed Nov 11, 2020 2:41 pm

❗️ FLEX version 5.6.0.0 is here! ❗️

➡️ BENCH and BOOT solutions for Kia and Hyundai

Works on the Bench with the Kefico CPEGD and CPGDSH ECUs installed on Kia and Hyundai, on models such as Stonic 1.0 T-GDI 2017 and i30 1.6 T-GDI 2017.

✅ Reading and Writing the complete contents of the Internal Flash and Internal EEPROM
✅ ECU opening is not requited

Also new are the Bootloader protocols for programming BOSCH KEFICO KME1.9.3.1 and BOSCH EDC15C13 engine control units.

☑️ Check the new protocols here

As well as some bug fixes and software improvements.

⭐️ FLEX Master
⭐️ FLEX Slave

by **ECUTools** » Thu Nov 12, 2020 2:35 pm

❗️ K-TAG: new protocols for Bosch EDC16 in Service Mode! ❗️

✅ Reading and Writing
✅ Cloning
✅ Without opening the ECU Bosch EDC16

In addition to the three new protocols dedicated to EDC16, there now is the protocol in Boot for Bosch EDC15.

➡️ Bosch EDC16C3, Bosch EDC16C7
➡️ Bosch EDC16U31
➡️ Bosch EDC16C39
➡️ Bosch EDC15C7 ST10C167
Here

✅ Full vehicle list

⭐️ K-Tag Master
⭐️ K-Tag Slave