⭐️❗️❗️ ECULite - a brand new item in our stock for Toyotas, Mitsubishi and Volkswagen ❗️❗️⭐️

ECULite is modern and user-friendly software for editing the map area of various ECUs. This program allows you to edit the calibrations of the vehicle files to perform basic chip tuning.

The following maps are available:
✅ spark advance
✅ DTC detection mask of the catalytic converter system malfunction
✅ exhaust gas recirculation (EGR) valve
✅ oxygen sensor
✅ throttle valve
✅ optimum torque
✅ torque request, etc.

For Diesel vehicles the following maps are available:
✅ boost pressure
✅ torque request
✅ injection start phases
✅ injection time
✅ fuel pressure
✅ exhaust gas recirculation valve (EGR)
✅ Error Detection Mask etc.

⭐️ Specifics:
- User-friendly interface with the possibility of displaying calibrations in tables, 3D and 2D charts
- Display of error mask and calibration constants
- Two files comparison function with the ability to copy calibrations from the compared file
- Calibration editing, setting of the absolute value and changing the percentage ratio
- Modular design of calibration description maps
- USB dongle

❗️ Please note:
It is best to upload files to Toyota Denso and Mitsubishi Melco 3 using PCMflash. This flasher does checksum corrections before the writing. The ECULite editor does not make checksum corrections for the above ECU, as it is not necessary.

It is recommended that the file loading into Bosch EDC16U1 (31/34) ECUs should be done using Combiloader or Kess v2. The Kess v2 does checksum corrections before they are written in the ECU. In the near future Combiloader will also be able to do checksum corrections.

⭐️ ECULite

❗️ PRE-SALE License 35 - Hyundai-Kia MB90F025(26)/MB91F037(047)+93С66 OBDII ❗️

The module allows to work with dashboards via OBD or on the bench using a J2534 device.

Available functions:

✅ Mileage reading/writing
✅ 93C66 EEPROM reading/writing
Reading/writing take 1–2 minutes depending on the J2534 device.

☑️ Supported J2534 devices:
- DrewTech Mongoose
- DrewTech CarDAQ
- Scanmatik 2 PRO
- SMS — DiaLink
- Chipsoft J2534 Lite (with disabled OpenPort2 support)
- Chipsoft J2534 Mid (with disabled OpenPort2 support)
- Chipsoft J2534 Pro (with disabled OpenPort2 support)

❗️ Openport 2.0 is NOT supported!

Suggested car list:

✅ Hyundai Equus 2013–2015 Full TFT LCD(Fujitsu MB91F037+93C66)
✅ Hyundai Centennial 2013–2015 Full TFT LCD(Fujitsu MB91F037+93C66)
✅ Kia Cadenza 2013_2016 7» TFT LCD(Fujitsu MB91F037+93C66)
✅ Kia Carens 2012–2016 Small LCD(Fujitsu MB90F026+93C66)
✅ Kia Carens 2012–2016 SuperVision TFT LCD(Fujitsu MB91F037+93C66)
✅ Kia Carnival 2014+ Small segment LCD(Fujitsu MB91F047+93C66)
✅ Kia Sedona 2014+ Small segment LCD(Fujitsu MB91F047+93C66)
✅ Kia Cerato 2012–2016 Segment LCD(Fujitsu MB90F025+93C66)
✅ Kia K3 2012–2016 Segment LCD(Fujitsu MB90F025+93C66)
✅ Kia Forte 2012–2016 Segment LCD(Fujitsu MB90F025+93C66)
✅ Kia Cerato 2012–2017 SuperVision Monochrome(Fujitsu MB91F037+93C66)
✅ Kia K3 2012–2017 SuperVision Monochrome(Fujitsu MB91F037+93C66)
✅ Kia Forte 2012–2017 SuperVision Monochrome(Fujitsu MB91F037+93C66)
✅ Kia Cerato 2012–2017 SuperVision TFT LCD(Fujitsu MB91F037+93C66)
✅ Kia K3 2012–2017 SuperVision TFT LCD(Fujitsu MB91F037+93C66)
✅ Kia Forte 2012–2017 SuperVision TFT LCD(Fujitsu MB91F037+93C66)
✅ Kia Quoris 2012–2014 SuperVision Full TFT LCD(Fujitsu MB91F037+93C66)
✅ Kia Quoris 2012–2014 SuperVision TFT LCD(Fujitsu MB91F037+93C66)
✅ Kia Quoris 2015–2017 SuperVision Full TFT LCD(Fujitsu MB91F037+93C66)

❗️ The license will be available after 24.11.2020

For price and information please refer to the links below:

⭐️ MD flasher
⭐️ License 35 - Hyundai-Kia_MB90F025(26)/MB91F037(047)+93С66_OBDII

⭐️ New Autotuner Module for Land Rover (JLR) 3.0 MHEV ⭐️

ECU: Bosch MG1CS028

➡️ Autotuner is now able to perform the following operations:

✅ Bench Read
✅ Bench Write

On the following vehicles:

☑️ Jaguar 3.0 P340 MHEV - Bosch MG1CS028
☑️ Land Rover 3.0 P340 MHEV - Bosch MG1CS028
☑️ Land Rover 3.0 P360 MHEV - Bosch MG1CS028
☑️ Land Rover 3.0 P400 MHEV - Bosch MG1CS028

Autotuner Master
Autotuner Slave

❗️ KESSv2 presents Diesel Toyota GEN III ❗️

✅ Real reading and writing via OBD for the new Hilux and Land Cruiser equipped on the DENSO ECU and the microcontroller R7F701202 in the 748 KESSv2 protocol.

If you already have the 748 protocol, everything is included: real reading and writing through OBD with KESSv2.

➡️ Denso R7F701202

☑️ Toyota Hilux 2.4 16V VTN
☑️ Toyota Hilux 2.8 16V VTN
☑️ Toyota Land Cruiser 2.8 16V D-4D VTN

✅ The support the new Land Rover 5.0 V8 SVR and SCV8 equipped with Bosch MED 17.8.32 has also been added!

If you already have the 706 protocol, you can immediately start working, even with an expired subscription.

➡️ BOSCH MED17.8.32

☑️ Land Rover L494 5.0 V8 SCV8
☑️ Land Rover L494 5.0 V8 SVR

⭐️ KESSv2 Master
⭐️ KESSv2 Slave

❗️ PRE-ORDER License 47 - LADA/RENAULT/DACIA_KEY_BCM_CONTINENTAL_OBDII ❗️

The module allows working with BCM Continental via OBD or on the bench.

Available functions:
✅ BCM identification; Error codes reading/erasing;
✅ Flash memory reading/writing (without the loading area);
✅ Vin change; BCM virginizing;
✅ PINCODE reading (necessary to write keys into BCM),
✅ ISK code reading, transponder password reading;
✅ BCM training (virgin unit pairing);
✅ ECM training (new engine ECU);
✅ Key programming, even if lost.

Pin code reading takes ~1 minute depending on the J2534 device.

☑️ Supported J2534 devices:

DrewTech Mongoose
DrewTech CarDAQ
Scanmatik 2 PRO
SMS — DiaLink
Chipsoft J2534 Lite (with disabled OpenPort2 support)
Chipsoft J2534 Mid (with disabled OpenPort2 support)
Chipsoft J2534 Pro (with disabled OpenPort2 support)

❗️ Openport 2.0 is NOT supported!

Suggested car list:
✅ LADA VESTA 2015 +
✅ Renault Logan 2012 +
✅ Renault Duster 2012 +
✅ Renault Dokker 2012 +
✅ Renault Lodgy 2012 +
✅ Renault Symbol 2012 +
✅ Dacia Logan 2012 +
✅ Dacia Duster 2012 +
✅ Dacia Dokker 2012 +
✅ Dacia Lodgy 2012 +
✅ Dacia Symbol 2012 +

❗️ The license will be available after 4.12.2020

For price and information please refer to the links below:
⭐️ MD flasher
⭐️ PRE-ORDER License 47 - LADA/RENAULT/DACIA_KEY_BCM_CONTINENTAL_OBDII

❗️ Update: I/O TERMINAL MULTI TOOL V42 ❗️

Full Reading and Writing:
✅ SIEMENS/ CONTINENTAL FORD EMS2101, EMS2102, EMS2103 (works with SIEMENS simcard).
✅ GM SIEMENS/ CONTINENTAL SIMTECT 77 (works with SIEMENS simcard).
✅ GM SIEMENS/ CONTINENTAL D42,D52,42R (works with SIEMENS simcard).
✅ FIAT IAW 7GF (works with MARELLI ECU license).

➡️ Released new license for VOLVO P3 platform CEM modules (possible activate on VOLVO simcard)
☑️ VOLVO DELPHI BCM M30882F+95320
M30882F DATA & PROGRAM FLASH R/W. EEPROM 95320 R/W.
☑️ VOLVO DELPHI BCM (both versions of CEM hardware) R5F64524/R5F64525. R5F64524/R5F64525 DATA & PROGRAM FLASH R/W.
☑️ Volvo CEM modules included in MULTITOOL software.

❗️ In order to R/W them, you need to know the PINCODE.

✅ ECU wiring diagrams document has also been updated.

I/O Terminal

❗️ bFlash Update: V2011A - New OBD & Bench protocols ❗️

➡️ Reading : 3-5 minutes
➡️ Writing: 2 minutes

⭐️ NEW OBD PROTOCOLS

✅ AUDI
Bosch MG1CS002IFX TC298
Bosch MG1CS008 TC298

✅ BENTLEY
Bosch MG1CS008 TC298

✅ BUICK
AcDelco E81 MPC5676
AcDelco E82 MPC5676
AcDelco T87 MPC5640 *

✅ CHEVROLET
AcDelco E82 MPC5676
AcDelco E84 MPC5676
AcDelco E84 MPC5676
AcDelco E87 MPC5565
AcDelco E87 MPC5565
AcDelco T87 MPC5640 *

✅ GMC
AcDelco E82 MPC5676
AcDelco T87 MPC5640 *

✅ HOLDEN
AcDelco E82 MPC5676

✅ LAMBORGHINI
Bosch MG1CS008 TC298

✅ OPEL
AcDelco E84 MPC5676
AcDelco E87 MPC5565

✅ PORSCHE
MG1CP007 TC298
MG1CS002IFX TC298
MG1CS008 TC298

⭐️ NEW BENCH PROTOCOLS

☑️ BUICK
AcDelco E82 MPC5676

☑️ CADILLAC
AcDelco E81 MPC5676
AcDelco E82 MPC5676
AcDelco T87 MPC5640 *

☑️ CHEVROLET
AcDelco E82 MPC5676
AcDelco T87 MPC5640 *

☑️ GMC
AcDelco E82 MPC5676
AcDelco T87 MPC5640 *

☑️ HOLDEN
AcDelco E82 MPC5676

☑️ OPEL
AcDelco E84 MPC5676
AcDelco E87 MPC5565

* TCU protocols

For prices and more information please refer to the links below:

bFlash Master
bFlash Slave

❗️ CombiLoader Update ❗️

The update of the integrated modules and of the software

✅ AMT VAZ (J2534): the software list expansion
✅ Bosch ME17 China: the error when writing some ECUs has been fixed
✅ Bosch MEDC17 VAG K/CANTP2.0: identification option without owning the module has been added
✅ Bosch MEDC17 VAG UDS: identification option without owning the module has been added
✅ Delphi MT05: language changing option has been added
✅ EMS3120 Renault: the state diagnostics has been improved
✅ SIMOS12 VAG: SIMOS12.2 is now supported
✅ SIMOS18 VAG: Checksum Corrections has been improved
✅ Siemens SIM2K-25x Hyundai/Kia: the support of client files forming has been added
✅ Siemens SIM2K-26x Hyundai/Kia: the support of client files forming has been added

For prices and more information please refer to the link below:
CombiLoader

❗️ New Nissan Rogue supported by K-TAG in Boot mode ❗️

✅ Reading and Writing the ECU Hitachi NEC029 SH72533, petrol engine 2.5 16v CVT

➡️ Supported vehicle:
Nissan Rogue 2.5 16v CVT

For prices and more information please refer to the links below:

K-Tag Master
K-Tag Slave

❗️ FLEX version 5.7.0.0: New solutions in Bootloader for Continental ECUs ❗️

➡️ Continental Simos 10.xx ECUs in VAG vehicles in Boot mode, including:
Volkswagen Polo 6R
Audi A1 8x
Seat Ibiza 6J
Volkswagen Jetta 1B

➡️ New solutions are also available in Bootloader for programming the Continental SID605 ECUs equipped on Faw Jiefang brand vehicles.

For the new protocols, bug fixes and general improvements please refer to the link

FLEX Master
FLEX Slave