Hello everyone,

Today i tried Chiptuning a Citroen Berlingo 2017 1.6 edc17c60.

After disconnecting the battery i removed the ecu. I read the file with PCM Flash and changed it for Stage 1 and Egr off and wrote it back.
After that i connect the ecu Car is starting. he drove the car and came back and turned off the car.

3 minutes later he wants to leave but his car did not start. no warning message or anything. so i let the car sit for about 5 minutes then tried starting but it did not start. i placed the original file back in the ecu. and read on the internet i need to reset the bsi with some procedure. i did that then te car start. after 3 minutes waiting the car did not start. then 30 minutes after the car starts again.

What can be the problem, Can someone please check my files
Or is there any other way to chiptune this car without the bsi getting in the way.

Kind Regards Sam

Files:
https://mega.nz/folder/9fZDUSzD#LAiZDGlQM-oLuP7wU9fIhA

Disable tprot and calculate checksums in winols and it will be fine, its KTM bench problem

Easy with flex.