❗️ Bosch MD1CS012 KIA supported by K-TAG! ❗️

Reading and Writing in service mode.

✅ Bosch MD1CS012
Genesis Gv80 JX1 3.0 VGT - Bosch MD1CS012 TC298
Kia Sorento MQ4 2.2 CRDi - Bosch MD1CS012 TC298

✅ Bosch EDC1753
Dongfeng K14 - Bosch EDC1753

K-TAG Master
K-TAG Slave

❗️ bFlash Update V2106A: EDC16 BENCH ❗️

➡️ NEW BENCH PROTOCOLS: Reading and Writing the ECUs on the bench

✅ HYUNDAI
BOSCH EDC16C39 MPC562

✅ JEEP
BOSCH EDC16CP31 MPC564

✅ MERCEDES
BOSCH EDC16CP36 MPC564
BOSCH EDC16C2 MPC556

✅ OPEL
BOSCH PSG16 MPC556
BOSCH EDC16C9 MPC556

✅ PEUGEOT/ CITROEN
BOSCH EDC16CP39 MPC564

✅ RENAULT
BOSCH EDC16C36 MPC564

⭐️ bFlash Master
⭐️ bFlash Slave

❗️ BitBox Update! ❗️

⭐️ New modules:

➡️ Ford Delphi Diesel CAN now available with following families:

✅ Ford Delphi DCM3.5 MPC5566 CAN - reading/writing and checksums calculation.
✅ Ford Delphi DCM6.1 TC1797 CAN - reading/writing and checksums calculation.

➡️ Nissan Hitachi Gen1 CAN available for tests with:

✅ Nissan Hitachi SH705X/SH72XXX Gen1 CAN - reading/writing and checksums calculation. Automatic detection ECU type for reading and writing. Now tested SH7058/SH7059/SH72533. SH7055/SH72531 supported but not tested!

⭐️ New families:

➡️ Kia/Hyundai Kefico CPxxxx Petrol CAN:

✅ Kia/Hyundai Kefico CPGPSH2.14.1/CPEGP2.10.1 TC1728 CAN - reading/writing and checksums calculation.
✅ Kia/Hyundai Kefico CPGPSH2.14.1/CPEGP2.10.1 TC1728 BSL - reading/writing full flash in BSL mode and checksums calculation.

➡️ Ford Continental Petrol CAN:

✅ Ford Continental EMS2207 TC1738 CAN - virtual reading/writing and checksums calculation. VBF conversion also supported.

⭐️ Improvement and fixes:

✅ Bosch MSE6.0 fixed identification for virtual reading in some cases
✅ GM ACDelco E83 added support for some ECU variations
✅ Kia/Hyundai Sim2K-24X added support for some ECU variations
✅ Volvo Denso SH72546 and Volvo Denso SH72543 totally remade and now supports SM2/SM2 Pro and other devices. Made more stable and works with automatic power by default.
✅ DAF/Industrial Delphi ETC3 MPC5566 CAN totally remade and now supports more ECU variations and security systems.

⭐️ New features:
Automatic power management now available for almost all families. Please be careful, using automatic power of vehicle for OBD protocols can be dangerous!

⭐️ BitBox
⭐️ Ford Delphi Diesel CAN

⭐️❗️ PCMflash 1.2.2 ❗️⭐️

➡️ The new PCMflash software brings us two new modules and additional changes and improvements.

✅ New feature has been added: now the users are to tie the USB dongle to one PC. This is done via authorization on the Internet when the dongle is connected the first time.

⭐️ Module 77 — Bosch ME9/MED9/EDC16 Bootloader has been released, as well as ⭐️ Module 78 — Subaru Gearbox.

✅ For more improvements and updates please check this link.

PCMflash

❗️ FLEX Update! ❗️

⭐️ New solutions for Bench, Boot and AUD programming;
⭐️ Bench/OBD solutions for KTM & Husqvarna Keihin Bikes for FLEX.

✅ The new FLEX update version 5.15.0.0 allows safe working in bench of the Continental Simos 12.1 and Simos 12.2 ECUs installed in Audi branded cars, such as the TT (8J) 2.0 TFSI and in the Volkswagen Passat B7 1.8 TSI just to name a few.

✅ FLEX version 5.16.0.0 includes new protocols for the Bench and OBD programming of the Keihin engine control units installed in KTM and Husqvarna motorcycles and that also allows the recalibration of the Husqvarna Vitpilen/Svartpilen 701 until 2020, Husqvarna 701 SuperMoto until 2020, KTM 690 SMC until 2020, KTM 1190 ADVENTURE, KTM 1290 Super Duke GT Euro4 models, just to name a few.

More information here

FLEX Master
FLEX Slave

❗ Autotuner Update! ❗

⭐️ VAG 1.0 CNG - 1.2MPI
⭐️ Simos 11.1 OBD

Autotuner is now able to perform the following operations:
✅ OBD Read
✅ OBD Write
✅ FRF update/downgrade
✅ Back to stock

➡️ On the following vehicles:
✅ Simos 11.1 : VAG 1.0 CNG
✅ Simos 11.1 : VAG 1.2 MPI

⭐️ Ford 1.0T - 1.5T - 2.0 T - 2.3T - 3.5 Ecoboost
Bosch MEDG17.0

Autotuner is now able to perform the following operations:
✅ Bench full read
✅ Bench write

➡️ On the following vehicles:
✅ Ford 1.0T Ecoboost - 100/125hp
✅ Ford 1.0T Ecoboost mHEV - 100/125hp
✅ Ford 1.5T Ecoboost - 160hp
✅ Ford 2.0T Ecoboost (ST) - 240hp
✅ Ford 2.0T Ecoboost (ST) - 250hp
✅ Ford 2.3T Ecoboost - 276hp
✅ Ford 2.3T Ecoboost - 317hp
✅ Ford 2.3T Ecoboost (RS) - 350hp
✅ Ford 3.5 Ecoboost - 370hp
✅ Ford 3.5 Ecoboost - 520hp
✅ Ford 3.5 Ecoboost - 450hp
✅ Mustang 2.3T Ecoboost - 317hp

⭐️ Bosch DCU17PC42: Bench read/write

Autotuner is now able to perform the following operations:
✅ Bench Read
✅ Bench Write

➡️ On the following vehicles:
✅ Renault 1.6 DCI BiTurbo EU6
✅ Nissan 1.6 DCI BiTurbo EU6

⭐️ Bosch MEV17.2: Bench read/write

Autotuner is now able to perform the following operations:
✅ Bench Read
✅ Bench Write

➡️ On the following vehicles:
✅ Mini 1.6 DFI 16v 75ch
✅ Mini 1.6 DFI 16v 90ch
✅ Mini 1.6 DFI 16v 98ch
✅ Mini 1.6 DFI 16v 115ch
✅ Mini 1.6 DFI 16v 120ch
✅ Mini 1.6 DFI 16v 122ch

Autotuner Master
Autotuner Slave

❗️ K-TAG Service Mode for Mercedes-Benz produced from 2008 to today! ❗️

✅ Full reading and writing without opening the ECU with K-TAG for Bosch EDC17CP10 and Delphi CRD3.E/F/P for Mercedes-Benz.

More information here

❗ I/O TERMINAL MULTI TOOL V47 has been released ❗

✅ FIAT IAW 10GF MPC5642 FLASH+95640 EEPROM R/W
✅ VAG IAW 9GV MPC5634 FLASH+95320 EEPROM R/W

➡️ Reading and writing EEPROM both in encrypted form and decrypted form.
➡️ These options are included in MULTITOOL software and work for all MARELLI ECU license owners.

I/O Terminal

❗ bFlash Update! ❗

➡️ The bFlash team is proud to present its live tuning solution exclusively for MED17, EDC17, MG1 and MD1 ECUs. Thу new plugin allows tuning by integrating an editor within the bFlash interface.

The proprietary patch, which allows both real-time editing and high-frequency data acquisition, can be applied in BOOT, BENCH or OBD, depending on the methods supported by the OEM ECU.

✅ This feature is advised to be used by experenced users.
✅ The feature is reserved for master users only.
✅ More information in the video

➡️ HONDA
BOSCH MED17.9.3-TC1793

➡️ MERCEDES-BENZ
BOSCH MED17.7.1 TC1797
BOSCH MED17.7.2 TC1797
BOSCH MED17.7.3 TC1797
BOSCH MED17.7.3.1 TC1797_ExtFlash
BOSCH MED17.7.5 TC1793_ExtFlash
BOSCH MED17.7.7 TC1793

➡️ PORSCHE
BOSCH MED17.1.10 TC1793
BOSCH MD1CP014 TC298
BOSCH MG1CP007 TC298
BOSCH MG1CS002 MPC5777M
BOSCH MG1CS002 TC298
BOSCH MG1CS008 MPC5777M
BOSCH MG1CS008 TC298

➡️ SUZUKI
BOSCH MED17.9.3 TC1793

➡️ VAG
BOSCH EDC17C64 TC1797
BOSCH EDC17C74 TC1793
BOSCH MED17.1.1 TC1797
BOSCH MED17.1.27 TC1793
BOSCH MED17.1.62 TC1793
BOSCH MD1CP004 MPC5777M
BOSCH MD1CP004 TC298
BOSCH MD1CP014 TC298
BOSCH MG1CS001 MPC5777M
BOSCH MG1CS002 MPC5777M
BOSCH MG1CS002 TC298
BOSCH MG1CS008 MPC5777M
BOSCH MG1CS008 TC298
BOSCH MG1CS011 MPC5777M

✅ bFlash Master
✅ bFlash Slave

❗ PRE-ORDER - License 79 - Lada Vesta SRS TAKATA OBDII ❗

➡️ This module allows working via OBDII or on the bench with SRS Takata ECUs with SPC560P34L1 on Lada Vesta and ECU recovering.

➡️ Supported ECUs:
✅ 8450007028
✅ 8450007029

➡️ The module supports:
✅ Identification
✅ Error Reading
✅ Error eracing
✅ VIN reading
✅ Initialization
✅ Deinitialization
✅ Crash data erasing

❗ The activation files will be sent within a week after 19.07.2021

MD flasher
License 79