hi guys

ive been comparing some maps to change the voltage on the pump

0.205mm to 0.260mm
seen one about 0.189(or so)- 0.216
0,3v increase at top iq
0,3v decrease at low iq

i guess in my case its +0.4v

should i change static soi or leave it stock
the file isnt stock

first time trying to adjust this if someone could give me some tips

thanks

Hello,

First try to ajust I.Q. from VCDS (, if the idle is not good, then mess with the voltages, but is not linear, is a bit try and error.

IQ adjustment:

1) Open the Vag-com software.
2) Click on ENGINE.
3) Click on LOG IN
4) Enter 12233 in the login field then click DO IT.
5) Click on ADAPTATION.
6) It should already be in channel 1, which is what you need for IQ adjustments.
7) Note the reported IQ number (usually between 2-4mg/r)
8) Adjust the value from 32768 to something like 32750 and see what the IQ changes to.
9) keep adjusting the value till you get about 1mg/r more than what you started with.
So if your stock setting is 3mg/r, increase it to 4mg/r.
10) save the new value & take for a test drive.