⭐️ ❗️ PCMflash vacation! ❗️⭐️

➡️ The PCMflash developer is taking a vacation off work from August 17th to 31st, inclusive. You will be able to get activations faster on August 16th and September 1st onward.

During the developer's days off work the activations and support can be delayed up to 3 days. Feel free to plan your purchases accordingly.

⭐️ PCMflash

❗ bFlash Update V2108A ❗

The bFlash team presents its advanced logging solution exclusively for VAG SIMOS18.1, SIMOS18.10 and PORSCHE SDI21.

This solution is intented to offer you the possibility to load your own logging configuration in bLog.

The proprietary patch allows high-frequency data acquisition. It can be applied via OBD or in BOOT, depending on the methods supported by the OEM ECU.

❓ How fast is it?
You can log each variable at a rate of 30-50Hz depending on your configuration.

❓ How do I activate this function?
You have to patch the ECU and your A2L once.

❓ Does bFlash provide the definitions?
No, you will need to define your own A2L to work with this feature.

❓ Do I really have access to everything?
Yes all the RAM memory is available, you can log all OEM variables as well as your own custom variables.

➡ PROTOCOLS

✅ VAG
SIMOS18.1
SIMOS18.10

✅ PORSCHE
SDI21

⭐ bFlash Master
⭐ bFlash Slave

❗ ECM Titanium Update! ❗

✅ ECM Titanium Drivers Update on Bosch MED17.5.21 and MED17.5.25 equipped on VAG group vehicles.

➡ More information here

❗️ K-TAG Update! ❗️

➡️ TCU Bosch ZF8HP and Temic DSG. New protocols for repairs and elaborations in Service Mode in K-TAG.

The updated protocols concern the TCUS BOSCH ZF8HP and TEMIC DSG, equipped on BMW and VAG vehicles. You can intervene with full reading and writing, thanks to K-TAG, without opening the ECU.

More information here

✅ K-TAG Master
✅ K-TAG Slave

➡️❗️ BitBox/BitEdit SALE ❗️⬅️

⭐️ September 13th - 19th ❗️13% OFF❗️ ALL modules ⭐️
Use the promo code ➡️ bitsale1309 ⬅️ to get this 13% discount.

BitBox
BitEdit

❗ bFlash Update V2109A ❗

⭐ bFlash now supports Benelli & CFMoto MSE6.0/US6.0 ECU for all users.

❗ Please note that a specific bench power supply is needed in order to communicate with these ECUs.

✅ The reading time is around 1 minute and 20 seconds.
✅ The writing time is around 20 seconds for a calibration.

✅ NEW BENCH PROTOCOLS

➡ BENELLI
MSE6.0

➡ CFMOTO
MSE6.0
US6.0

bFlash Master
bFlash Slave

⭐️❗️ TGFlash is available on our website! ❗️⭐️

✅ A brand new flasher is available on our website! TGFlashis a tool that does not require a dongle or shipping!

➡️ TGFlash is a complete solution for ECU flash memory reading, virtual reading and reprogramming. Also, TGFlash lets you identify vehicle control units, read & clear DTC.

⭐️ More information here

TGFlash Master
TGFlash Standard
TGFlash Slave

❗️ ECM Titanium drivers updated on Continental SIMOS10 and SIMOS18 ❗️

➡️ ECM Titanium Drivers Update on Continental SIMOS10 and SIMOS18 equipped on Audi, Seat, Skoda and Volkswagen.

✅ MAXIMUM / MINIMUM DIFFERENCE FOR TOO HIGH / LOW ENGINE LOAD
✅ TEMPERATURE DIFFERENCE FOR TURBINE PROTECTION
✅ TURBO
✅ POP&BANG

More information here

ECM Titanium

❗ bFlash Update V2109B - Acura / Honda PGMFI ❗

✅ More support was added for popular Honda vehicles with 2.0L N/A, 2.0L Turbo, 2.4L N/A and 3.5L N/A engines. The 1.5T protocol was also revised and highly improved with reading time reduced from 50 minutes to around 10 minutes.

➡ How fast is it?
The reading time is between 10 and 18 minutes.
The writing time is between 3 and 6 minutes.

➡ How do I connect to the ECU?
You can connect bFlash directly to the OBD socket

NEW OBD PROTOCOLS

✅ ACURA

Keihin PGMFI MPC5566
Keihin PGMFI SH7254x
Keihin PGMFI TC275
Hitachi PGMFI SH72543

✅ HONDA

Keihin PGMFI MPC5566
Keihin PGMFI SH7254x
Keihin PGMFI TC275
Hitachi PGMFI SH72543

⭐ bFlash Master
⭐ bFlash Slave

❗️ FLEX version 5.23.0.0 Update! ❗️

✅ OBD Solutions for PSA DELPHI DCM6.2C in FLEX!

Released new Flex software for OBD programming/tuning of engine control unit PSA DELPHI DCM6.2C, this is installed on brands such as Citroen and Peugeot. With this Flex update (5.23. 0.0), chiptuning and access to the ECU is now possible via OBD diagnostic port.

The new protocol allows you to create a Full Backup of the ECU before tuning, saving all content from EEPROM and FLASH memory in one operation.

Supported vehicles:

✅ Citroen Jumper 2.0L 16V BlueHDI
✅ Citroen Relay 2.0L 16V BlueHDI
✅ Peugeot Boxer 2.0L 16V BlueHDI
✅ Citroen Jumpy 2.0L 16V BlueHDI

More information here

➡️ FLEX Master
➡️ FLEX Slave