307 110 HDi Bosch EDC15C2 Remapping with dpf/EGR

by **eskobarnas** » Sun Jul 01, 2012 3:39 pm

From advice from other i wil keeping one topic only here, because its eassier for everybody to keep it up to date.

What happens i have my dpf removes and trying now for the egr. With al lot help and contribution from everybody i can do it myself.

Now i already change the first line of the map in 000 so it will be :
000 001 000 000 001 000 001 000 001 048 EGR off

the second part see picture:
do i only need to change this red circle in 000 then is my egr off

see picture if it is this one the 7111F because i can''t find it and i hope that it is this one
http://i47.tinypic.com/2ij6kns.jpg

i found it??
http://i50.tinypic.com/2d8izqa.jpg

see below the file and info

Have a 307SW ES 2.0 HDI 110HP 2002

FILE: 307hdi110dpfoff.bin
Bytes: 7FFFF
Checksum: FF90
Marca: Bosch
Num. HW: 0281011081
Num. SW: 1037364193

by **eskobarnas** » Sun Jul 01, 2012 3:45 pm

ok thats done

now how to get a bin file

i mean how to save it now.

i looked in the guide and get only OLS file no bin file like 307hdi110dpfoff.bin

what to do?

by **ecuedit** » Sun Jul 01, 2012 7:03 pm

You can not export it with demo version of WinOLS...

by **eskobarnas** » Sun Jul 01, 2012 7:45 pm

ok i will get a full one

let you know

by **eskobarnas** » Sun Jul 01, 2012 9:25 pm

Step 1 - DPF OFF - done
Step 2 - EGR OFF - done
Step 3 - Remap - ok now we go for this step

i will try to do it myself

by **eskobarnas** » Mon Jul 02, 2012 12:07 am

hello can someone export ''''my changed file to dpf off egr off'' to bin file please

winols does work good on my computer so i cant export project to bin

file is hdi110without.dpf.egr

http://www.speedyshare.com/UJugd/10000.ols

thank you

by **eskobarnas** » Tue Jul 03, 2012 12:52 pm

is there nobody who can do this 2 minutes job for me?? ;)

by **ecuedit** » Tue Jul 03, 2012 1:17 pm

You must own non demo version of WinOLS to export the data to bin (you can buy it here: http://www.evc.de/en/default.asp).
You can also do the change in hex editor, now when you know where the switches are.

Try to look at here:
http://artemis.wszib.edu.pl/~mdudek/

or some other freeware hex editors.

You can always get all help and information you need almost any time,
but actual work should be done by yourself, hope you understand that.

Be aware what are you doing, you can block your ecu if you do a mistake,
and that will cost you a lot.

by **rlees85** » Tue Jul 03, 2012 2:08 pm

ecuedit, would changing this value in a hex editor not break the ECU as wouldn't the checksums also need to be recalculated and corrected?

I remember reading that winols can be found on the internet for free. you just have to look for it

by **ecuedit** » Tue Jul 03, 2012 6:18 pm

rlees85 wrote:ecuedit, would changing this value in a hex editor not break the ECU as wouldn't the checksums also need to be recalculated and corrected?

I remember reading that winols can be found on the internet for free. you just have to look for it

rlees85 you do not know the whole storry about this...

eskobarnas wrote:i am looking at winols to try to shutdown the EGR Only for test not to upload in my ecu i only want to know how

he won't upload the file to his ecu.

look here:

post770?hilit=to%20upload#p770

that's why we are telling you that you have to know what are you doing.

About software, you will have to investigate by yourself,
we do not support any illegal distribution of non genue software.

The correct way for doing it is to use software that calculates the checksums - correct.