how to remove immo from edc15

by **rodriguez1** » Tue Mar 05, 2013 12:22 pm

hi. I am new user on this forum. Please help immo off or reprogramming my immo on EDC15C2 renault laguna 1,9dci keykard starting on using hardware kwp2000+ .What is posible software to on off imo on car ? thank you

by **gbovs** » Mon Mar 25, 2013 4:33 pm

Sorry to jump in here :D
But slightly related problem.

Is there anything software wise - that will tell you if the immo is off or on in a .bin .eep file (ecu dump) may or may not be EDC15.

Thanks

George

by **Ionut** » Thu Apr 11, 2013 11:25 am

Hello. on EDC15 with 5 plugs (I think C7 revision) from an Alfa 2.4 JTD immo is stored in 29F400 or on eeprom?
I have a Galletto 1260, VCDS, Opel Scanner and OP-COM.
I can read eeprom with VCDS in blind mode and minimon? Needs boot mode (pin 24 at ground) or works in normal mode?

Thank you,
Ionut.

by **benguessoum** » Sat Apr 27, 2013 1:27 pm

hi all
you must read and wiret eeprom 5p08 and flash 29f......

by **X-Stranger** » Sat Apr 05, 2014 4:29 pm

Just to keep that topic up to date: I've had the client with Kia Sorento 2004 2.5 CRDi EDC15 and was able to completely disable immo in ECU flash (eeprom keeps untouched), the same way is it is disabled in cars made for Korea itself. However they usually also have cruise control disabled, but my method keeps cruise working.

The same worked for Kia Carens 2002-2006 2.0 CRDi. I think that this also must work for other Kia/Hyundai cars with EDC15 blocks.

by **lars** » Wed Jul 16, 2014 10:00 pm

Dear Sir
Hello , i am very happy to know such Technician family room ,
pls i need help from who can help with my case of bmw e46 engine on e30 ,

i need to switch off immo from the ecu to start the engine , pls if any one hear me i am waiting the reply ,

thanks a lot
lars

by **stanleybg** » Tue Nov 11, 2014 10:15 pm

Hello there.My friend has peugeot 406 2002 year 2.0Hdi.He has many problems with immo.Sometimes it accepts the code.Some time it wont start 20 minutes.I can access ECU with MPPS and work on ecu dump.Can someone help me to disable the immo ? What steps should i do ? Thanks.

by **stanleybg** » Fri Jun 05, 2015 7:11 pm

Is that true to remove immo in flash ?

"fill with ffs from 7cc5a to 7ccc5 then correct checksum tested working on 2 cars"

I am sure thath the immo can be removed from flash because one time tuner has prepared remap from other car
and when i installed it on my car no immo problems.He did not have my original file.I think there is some adresses the fill wit ffff
and when the car is remaped the BSI is coding this ffff with code.Am i wrong ?

by **stanleybg** » Fri Jun 05, 2015 7:33 pm

But what i need to remove the immo.If i get the pin code from EEPROM whats next ? Need toi reset the FLASH ( to be without immo) and then what about BSI EEPROM.What to write to BSI FF on pin adress ? Any idea ?

by **mjtuning** » Sat Jul 04, 2015 11:33 am

X-Stranger wrote:Just to keep that topic up to date: I've had the client with Kia Sorento 2004 2.5 CRDi EDC15 and was able to completely disable immo in ECU flash (eeprom keeps untouched), the same way is it is disabled in cars made for Korea itself. However they usually also have cruise control disabled, but my method keeps cruise working.

The same worked for Kia Carens 2002-2006 2.0 CRDi. I think that this also must work for other Kia/Hyundai cars with EDC15 blocks.

I have one Santa FE edc15ecu with immo problem can you help?