Hi can someone look at this please. Is it safe?

ecuchudders wrote:Hi can someone look at this please. Is it safe?

Need to post your original for comparison



wbr

Hi thanks for the reply.

So what i have done here is changed injectors from pd 100 to pd130 injectors as the seals needed replacing and i knew were good injectors so decided to swap when they were coming out anyway, but kept the stock turbo, BV39 i believe. This will only be temporary until i fit a gt1749vb which i have laying around, Could you just check please to see if it will be ok

i have attached original file.

i have other original file that the injectors came from but from edc15 if that helps. Currently on edc16 as theres been an donor swap

Much appreciated

ecuchudders wrote:Hi thanks for the reply.

So what i have done here is changed injectors from pd 100 to pd130 injectors as the seals needed replacing and i knew were good injectors so decided to swap when they were coming out anyway, but kept the stock turbo, BV39 i believe. This will only be temporary until i fit a gt1749vb which i have laying around, Could you just check please to see if it will be ok

i have attached original file.

i have other original file that the injectors came from but from edc15 if that helps. Currently on edc16 as theres been an donor swap

Much appreciated

Your file is ok-ish, I personally wouldn't do the Torque limiter like that but it's not wrong.
Run logs and try it.


wbr

Thanks for the reply. Did you notice the injector calibration

ecuchudders wrote:Thanks for the reply. Did you notice the injector calibration

Your SOI is retarded quite a bit so duration should be ok,
best run logs to be sure



wbr