OHANA wrote:Hello,
I have a problem with this vehicle, there is 2 DTC codes that cause the vehicle to loose power.
1) P0607E1
2) P0607E2
Software stg1, DPF delete and ADBLUE delete has been done.
ECU is Bosch EDC17C66
If I clear the fault codes the vehicle drives fine for about 500 meter then looses power.
There is no engine light but with testing the 2 DTC codes show.
The vehicle's battery is not very good and looses power if left for a few hours and
need to be started with an assist battery or charger.
Attach is both the original and MOD file.
OHANA wrote:Hi Shooting,
Thank you for the file, the problem still persist.
There is no DTC codes in the ecu anymore but there is 3 other codes that
I'm not sure if that can have an effect.
1) ESP: C011100 Control unit (ESP) has detected an undervoltage
2) EPB: (Electric Park Brake) U100F00 Can signal "gear" from control unit "Electronic Ignition Lock is missing or Implausible
3) ATA: (Anti Theft Alarm) U110D87 Communication with the alarm siren has a malfunction. The message is missing
Thank you for your help so far, please see if you can help me fix this.
OHANA wrote:Thank you Shooting,
but do you know why I still have this power loss issue?
OHANA wrote:I replaced the battery with a new one from the agents but it did not solve the problem.
I believe the torque module is my problem. I need help to fix that issue
OHANA wrote:Thanks all sorted now, bought a new file and all is working as it should now.
The Adblue or DPF off was done wrong
Users browsing this forum: No registered users and 0 guests