Lazy cranking

Posts related to specific vehicles, or any other general tuning info.

Re: Lazy cranking

Postby ross2482 » Mon Aug 20, 2012 5:10 pm

I'm not sure if the smoke map is referenced when starting\cranking, but on the starting map you have found, anything under 600rpm will take the 600rpm value, i.e 200rpm will use the 600rpm value.

If smoke and torque limiter are referenced during startup, then yes there will be 0 IQ. I dont think they are though, as you would need quite a fast starter motor to spin the engine at 450rpm when cranking!

ross2482
Silver
 
Posts: 96
Joined: Mon Aug 13, 2012 9:30 am
Location: United Kingdom

Re: Lazy cranking

Postby ecuedit » Mon Aug 20, 2012 9:37 pm

Alex.T wrote:From what I've seen I would say Peugeot engineers were drunk when programming my 2.0 software version 1 037 353 401 :x


:lol:

Can you post the picture of your injection duration map from latest tune version xxx,
i am curious about something, it is hard to follow all the posts and all your versions :) and it is quicker for me to see the picture than open a bin every time...

User avatar
ecuedit
CARPRO
 
Posts: 2221
Joined: Fri Feb 24, 2012 10:10 pm
Location: European Union

Re: Lazy cranking

Postby Alex.T » Mon Aug 20, 2012 10:46 pm

Here it is
You do not have permissions to view the files yet. You have to be registered and you have to make at least 3 quality / unique posts.

User avatar
Alex.T
Gold
 
Posts: 173
Joined: Sat May 26, 2012 3:26 pm
Location: Milan, Italy

Re: Lazy cranking

Postby ecuedit » Tue Aug 21, 2012 8:28 am

This looks quite BAD. Show me the whole map.

User avatar
ecuedit
CARPRO
 
Posts: 2221
Joined: Fri Feb 24, 2012 10:10 pm
Location: European Union

Re: Lazy cranking

Postby Alex.T » Tue Aug 21, 2012 9:38 am

I hope it's not very bad :?

FIY I will always post the latest BIN here 406-2-0-hdi-rhz-project-t262
You do not have permissions to view the files yet. You have to be registered and you have to make at least 3 quality / unique posts.

User avatar
Alex.T
Gold
 
Posts: 173
Joined: Sat May 26, 2012 3:26 pm
Location: Milan, Italy

Re: Lazy cranking

Postby RPM freak » Tue Aug 21, 2012 9:55 am

Injection duration map
X = Injected Quantity in mm3
Y = Rail Pressure in bar
Z = injector opening time in uS

This is SOI map.

User avatar
RPM freak
Site Admin
 
Posts: 621
Joined: Thu Mar 01, 2012 9:49 pm
Location: European Union

Re: Lazy cranking

Postby Alex.T » Tue Aug 21, 2012 10:04 am

RPM freak wrote:Injection duration map
X = Injected Quantity in mm3
Y = Rail Pressure in bar
Z = injector opening time in uS

This is SOI map.

OMG I am drunk :lol:
I just don't know where I read Injection start :roll:
I'll post duration asap

User avatar
Alex.T
Gold
 
Posts: 173
Joined: Sat May 26, 2012 3:26 pm
Location: Milan, Italy

Re: Lazy cranking

Postby Alex.T » Tue Aug 21, 2012 10:11 am

Everything is stock, only 1500bar is made by me.
You do not have permissions to view the files yet. You have to be registered and you have to make at least 3 quality / unique posts.

User avatar
Alex.T
Gold
 
Posts: 173
Joined: Sat May 26, 2012 3:26 pm
Location: Milan, Italy

Re: Lazy cranking

Postby ecuedit » Tue Aug 21, 2012 5:12 pm

OK your lazy cranking is not related to your modification in injection duration map.
That's what I wanted to see.

User avatar
ecuedit
CARPRO
 
Posts: 2221
Joined: Fri Feb 24, 2012 10:10 pm
Location: European Union

Re: Lazy cranking

Postby Alex.T » Tue Aug 21, 2012 5:30 pm

Cranking was lazy before starting to remap...
I bet you tought I deleted 120mm3 column to make space for more IQ :D

User avatar
Alex.T
Gold
 
Posts: 173
Joined: Sat May 26, 2012 3:26 pm
Location: Milan, Italy

PreviousNext

Return to General tuning

Who is online

Users browsing this forum: No registered users and 2 guests