1,9Tdi tuning Vw.

by **Pierre3400** » Thu Dec 05, 2013 2:07 pm

Hello guys,

I am going to buy a Vw Touran 1,9Tdi soon, and will be getting it rempapped. I am going to pay for for this at first hand, but later on i would like to know if it is possible for me to pull out the mapping they install, and then install the mapping on my dads Golf 5 1.9tdi?

If yes, what tools would i need for the Job.

I already have a Vagcom cable, but dont know if i need a special one for ECU remapping?

by **dean21b** » Thu Dec 05, 2013 6:05 pm

Hi, you can`t use same map for the cars, vagcom is for diagnostics, there are other interfaces for chiptuning.

by **domi** » Fri Dec 06, 2013 10:36 am

you can usr the map for the golf aswell but the hardware and software numbers must be the same but there are differences in hardware aswell i wouldn't advice it

by **JSE** » Fri Dec 20, 2013 11:38 am

Pierre3400 wrote:Hello guys,

I am going to buy a Vw Touran 1,9Tdi soon, and will be getting it rempapped. I am going to pay for for this at first hand, but later on i would like to know if it is possible for me to pull out the mapping they install, and then install the mapping on my dads Golf 5 1.9tdi?

If yes, what tools would i need for the Job.

I already have a Vagcom cable, but dont know if i need a special one for ECU remapping?

The best thing is only use the software from the car. otherwise you get problems.
Always use checksum.
You can not use the software on your dads car.

by **Pierre3400** » Thu Dec 26, 2013 1:32 am

Thanks for replys.

That out the way, what do i need to start messing around with my ecu?

I have 1,9tdi, i have vag-k cable, but i need a new cable system for ecu. First up, my car has the warm start issue that is down the revs needing to be over 280rpm before injectors kick in. This i need to learn to fix.

I know its in the ecu, and i need to disable it, i have my own 1,9tdi, and my dads 2,0tdi and 1,9tdi i need to fix this on, so any help as to what hardware i need to buy, please help me out.

by **Pierre3400** » Thu Dec 26, 2013 2:00 am

Would Galletto 1260 be enough for me to change the part in the mapping for the warm start issue?

by **abc-tuning** » Thu Dec 26, 2013 2:18 am

Galletto 1260 will be enough for read/write your file from the ECU

In EDC16 ECU they are two maps for Cold/Hot start

by **Pierre3400** » Thu Dec 26, 2013 3:17 am

abc-tuning wrote:Galletto 1260 will be enough for read/write your file from the ECU

In EDC16 ECU they are two maps for Cold/Hot start

Okay, so i would be looking at reading the warm mapping, and then needing software to edit that map?

Which software can edit such a map?

by **Pierre3400** » Sat Dec 28, 2013 12:44 pm

No one?

by **abc-tuning** » Sat Dec 28, 2013 8:09 pm

Every software can change maps but if you know how to find map in the hexdump

Try to do a little bit a research and you will find everything thats needed for flashing and changing map on your file