ECU LOCKED!

Posts related to specific vehicles, or any other general tuning info.

ECU LOCKED!

Postby djbalkanac » Mon Oct 08, 2012 3:47 pm

So what to do if your ECU lock... :shock:

You are reading/writing and your ECU lock!

So i am wondering now what its the solution to unlock your ECU?
What to do to avoid your ECU become locked?

I wanna know for EDC15/16 - any solution or you need to have equipment

djbalkanac
Silver
 
Posts: 89
Joined: Fri Jun 22, 2012 10:04 am
Location: Europe

Re: ECU LOCKED!

Postby Dsmoke » Mon Oct 08, 2012 6:42 pm

What did you do? Locked after falshing file?

Dsmoke
New user
 
Posts: 14
Joined: Wed Oct 03, 2012 5:47 pm
Location: Scandinavia

Re: ECU LOCKED!

Postby RPM freak » Tue Oct 09, 2012 4:59 pm

Depends od the ECU.
The best backup equipment you should have is BDM and EPROM programer.

User avatar
RPM freak
Site Admin
 
Posts: 621
Joined: Thu Mar 01, 2012 9:49 pm
Location: European Union

Re: ECU LOCKED!

Postby djbalkanac » Wed Oct 10, 2012 2:33 pm

I didnt yet locked any ECU, but i wanna be informated if it happen so i know what to do and how to react...

I wanna now for EDC15/16 - Bosch ( vw,audi,seat,skoda )

djbalkanac
Silver
 
Posts: 89
Joined: Fri Jun 22, 2012 10:04 am
Location: Europe

Re: ECU LOCKED!

Postby colgate » Wed Oct 10, 2012 4:15 pm

for old edc15 without problem to reaad with galleto or mpps by obd.
after that you can recover with desoldering 29f400 and program directly with file by obd !
on edc 16 is difficult better way remove ecu put on bench read by bdm all mpc+flash+eeprom and you are save now because if you kill the ecu you can finde used and clone it.
brg

colgate
New user
 
Posts: 15
Joined: Wed Oct 10, 2012 11:23 am
Location: bulgaria

Re: ECU LOCKED!

Postby djbalkanac » Thu Oct 11, 2012 8:45 pm

Can EDC15/16 lock with original flashing tool ( like: kess v2 )

djbalkanac
Silver
 
Posts: 89
Joined: Fri Jun 22, 2012 10:04 am
Location: Europe

Re: ECU LOCKED!

Postby ecuedit » Thu Oct 11, 2012 11:32 pm

It is not always the issue on flasher, if you interrupt the process, or voltage deviation and so on.
Colgate has the point.

User avatar
ecuedit
CARPRO
 
Posts: 2221
Joined: Fri Feb 24, 2012 10:10 pm
Location: European Union

Re: ECU LOCKED!

Postby Dsmoke » Mon Oct 15, 2012 3:01 pm

I have read that some guys have succeed repair few ecu:s with mpps. Those ecu:s was locked when writing fails with galletto. No need desoldering.

When you do repair flashing with mpps in broken ecu you must do it by bench flashing and writing in recovery mode. Also ECU must be in boot mode.

Here is web site where you can find information to ecu pinouts and boot pins.

http://wiki.obdtuning.com/?title=Debugg ... n#EDC_15_7

Dsmoke
New user
 
Posts: 14
Joined: Wed Oct 03, 2012 5:47 pm
Location: Scandinavia

Re: ECU LOCKED!

Postby mexanico1971 » Mon Oct 15, 2012 11:41 pm

no ! not always is necessary to do it on the bench, but is more readably !
I was make recovey in 2 ecu !widht MPPS
edc15c2 2.0 hdi and last weekend in a C5 2.2 hdi directly from the obd plug

BR

mexanico1971
Silver
 
Posts: 87
Joined: Wed Sep 19, 2012 3:08 am
Location: Portugal

Re: ECU LOCKED!

Postby Dsmoke » Tue Oct 16, 2012 5:13 am

Ok, thats good to hear. Did you do it in mpps recovery mode from obd?

Dsmoke
New user
 
Posts: 14
Joined: Wed Oct 03, 2012 5:47 pm
Location: Scandinavia

Next

Return to General tuning

Who is online

Users browsing this forum: No registered users and 13 guests