307 2.0 hdi 110 egr off

by **fcardoso** » Mon Jan 07, 2013 1:29 pm

Hi,

I have disabled the egr of a 307 2.0 hdi 110hp.
Can anyone tell me if the egr is realy off and checksum ok?

Best regards,
filipe

by **adriancl** » Mon Jan 07, 2013 3:40 pm

Theoretical you have made EGR off.For safety make a test with diagnostic tool.
Checksum is O.K.

by **fcardoso** » Mon Jan 07, 2013 4:19 pm

Thanks :)

File hs been uploaded to the car. Now I gonna put a plate on egr valve and blank egr electro.
My question is about the egr (flaps i don't know the english name for it)??? should i unplug too?

B.Regards.

by **adriancl** » Mon Jan 07, 2013 9:39 pm

Do not unplug the EGR .

by **Mr Whippy** » Mon Jan 14, 2013 1:47 pm

Over on ecu connections they are saying duty cycle of the solenoid goes to 100% in the absence of the EGR switch being set on.

That is probably not ideal, so unplugging the device is probably more appropriate if the EGR switched off ECU's don't expect a solenoid to be on that ECU output!

I'm not sure why that is the case though, since EGR switch should turn off everything, but someone was saying the fall-back state for EGR was the EGR default duty cycle control map, and if you set that to zero then you can switch off EGR AND leave it plugged in, and get a 0% duty cycle signal (ie, nothing to the solenoid)

Really not sure here but I think unplugging and switching is the safest approach.

Dave