hiya.
i plugged pp2000 into my Ex's car today but it would not reconise the ECU.
kept saying it was refrencing it. and that the right ECU isnt in the car...??
so i cant access the Engine ECU so read any faults etc.
It reads the VIN and the other features like the BSI.
but just wont access the ENGINE ECU...?
Confused.... Help please...

Peugeot 307 2.0 HDI (90)

ive seen it can be possible for the build number printed in the car to possibly be wrong...
is there another way to look this code up..?

hi everyone
must even if your ecu has the 12v supply on the connector Bm1 Bl1
good luck

do you have immo issues? ecu does not show up if immo is locked

nedro wrote:hi everyone
must even if your ecu has the 12v supply on the connector Bm1 Bl1
good luck

Pardon..? i didnt get any of that... sorry...

plagu wrote:do you have immo issues? ecu does not show up if immo is locked

Immo..? is that immobiliser..? if so... then no, no issues that i know off.

yes !
1º check voltage batt !
2º or put the engine on runing !
in some pug 307 lexia do not comunicate very well !

BR

would it help to maybe update diagbox..?
im running v6.01 and that scans my car fine : Pug 307 110 (51)
and the exs car is Pug 307 90 (53)
so it is newer... could this be the issue..??

if this could resolve the issue... is it ok to update through the diagbox online updater... as i see there are updates there, i just didnt know if it was ok to use them...

also... i didnt think you could scan the car with the engine running...??

it could be your interface dont work with diagbox a lot of seller package with interface but interface not compatible with software ive saw this before use pp2000

but, if my interface wasnt working or compatible with diagbox, it shouldnt scan my car should it..?
have seen diag 7.04 is out, so going to try and download that at some point and see how that runs.

Hi did you get connected to your RHY engine of your 90 bhp 307 ? Are you using Peugeot Planet 2000?